Ticket #2133: dmesg1.txt

File dmesg1.txt, 53.5 KB (added by lindi, 10 years ago)
Line 
1[    0.000000] Linux version 2.6.28-GTA02_lindi_1b17c67794364bee-mokodev (lindi@apps2) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 PREEMPT Mon Nov 24 23:44:03 UTC 2008
2[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
3[    0.000000] CPU: VIVT data cache, VIVT instruction cache
4[    0.000000] Machine: GTA02
5[    0.000000] Memory policy: ECC disabled, Data cache writeback
6[    0.000000] On node 0 totalpages: 32768
7[    0.000000] free_area_init_node: node 0, pgdat c049ccec, node_mem_map c09a9000
8[    0.000000]   Normal zone: 256 pages used for memmap
9[    0.000000]   Normal zone: 0 pages reserved
10[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
11[    0.000000]   Movable zone: 0 pages used for memmap
12[    0.000000] CPU S3C2442B (id 0x32440aab)
13[    0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
14[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
15[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
16[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
17[    0.000000] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5
18[    0.000000] RCU-based detection of stalled CPUs is enabled.
19[    0.000000] irq: clearing pending ext status 000b12f0
20[    0.000000] irq: clearing pending ext status 000902d0
21[    0.000000] irq: clearing subpending status 00000087
22[    0.000000] irq: clearing subpending status 00000082
23[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
24[    0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
25[21474536.485000] Console: colour dummy device 80x30
26[21474536.485000] console [tty0] enabled
27[21474536.490000] console [ttySAC2] enabled
28[21474536.495000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
29[21474536.500000] ... MAX_LOCKDEP_SUBCLASSES:    8
30[21474536.505000] ... MAX_LOCK_DEPTH:          48
31[21474536.505000] ... MAX_LOCKDEP_KEYS:        8191
32[21474536.510000] ... CLASSHASH_SIZE:           4096
33[21474536.515000] ... MAX_LOCKDEP_ENTRIES:     8192
34[21474536.520000] ... MAX_LOCKDEP_CHAINS:      16384
35[21474536.525000] ... CHAINHASH_SIZE:          8192
36[21474536.530000]  memory used by lock dependency info: 2527 kB
37[21474536.535000]  per task-struct memory footprint: 2304 bytes
38[21474536.540000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
39[21474536.545000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
40[21474536.575000] Memory: 128MB = 128MB total
41[21474536.575000] Memory: 119892KB available (4288K code, 5383K data, 180K init)
42[21474536.580000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640)
43[21474536.685000] Mount-cache hash table entries: 512
44[21474536.690000] CPU: Testing write buffer coherency: ok
45[21474536.705000] net_namespace: 764 bytes
46[21474536.720000] regulator: core version 0.5
47[21474536.720000] NET: Registered protocol family 16
48[21474536.780000] S3C2410 Power Management, (c) 2004 Simtec Electronics
49[21474536.780000] modem wakeup interrupt
50[21474536.785000] wake enabled for irq 17
51[21474536.785000] wake enabled for irq 49
52[21474536.810000] S3C2442: Initialising architecture
53[21474536.810000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
54[21474536.815000] DMA channel 0 at c8808000, irq 33
55[21474536.820000] DMA channel 1 at c8808040, irq 34
56[21474536.825000] DMA channel 2 at c8808080, irq 35
57[21474536.830000] DMA channel 3 at c88080c0, irq 36
58[21474536.835000] S3C244X: Clock Support, DVS off
59[21474537.065000] SCSI subsystem initialized
60[21474537.070000] usbcore: registered new interface driver usbfs
61[21474537.075000] usbcore: registered new interface driver hub
62[21474537.080000] usbcore: registered new device driver usb
63[21474537.125000] Bluetooth: Core ver 2.13
64[21474537.125000] NET: Registered protocol family 31
65[21474537.125000] Bluetooth: HCI device and connection manager initialized
66[21474537.135000] Bluetooth: HCI socket layer initialized
67[21474537.160000] NET: Registered protocol family 2
68[21474537.210000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
69[21474537.220000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
70[21474537.225000] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
71[21474537.230000] TCP: Hash tables configured (established 4096 bind 4096)
72[21474537.235000] TCP reno registered
73[21474537.255000] NET: Registered protocol family 1
74[21474537.260000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
75[21474537.265000] Enabling FIQ using irq 29
76[21474537.265000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
77[21474537.275000] neo1973-version neo1973-version.0: starting
78[21474537.285000] gta02-pm-wlan gta02-pm-wlan.0: starting
79[21474537.495000] neo1973-memconfig neo1973-memconfig.0: starting
80[21474537.500000] NetWinder Floating Point Emulator V0.97 (double precision)
81[21474537.520000] ashmem: initialized
82[21474537.525000] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
83[21474537.530000] msgmni has been set to 234
84[21474537.545000] alg: No test for stdrng (krng)
85[21474537.545000] alg: No test for stdrng (ansi_cprng)
86[21474537.550000] io scheduler noop registered
87[21474537.550000] io scheduler deadline registered (default)
88[21474537.615000] ##### init_resume_dependency_list(head=c0487c5c)
89[21474537.615000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
90[21474537.625000] ##### init_resume_dependency_list(head=c0487d38)
91[21474537.625000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
92[21474537.635000] ##### init_resume_dependency_list(head=c0487e14)
93[21474537.635000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
94[21474537.720000] brd: module loaded
95[21474537.730000] usbcore: registered new interface driver cdc_ether
96[21474537.735000] usbcore: registered new interface driver rndis_host
97[21474537.740000] Driver 'sd' needs updating - please use bus_type methods
98[21474537.745000] Driver 'sr' needs updating - please use bus_type methods
99[21474537.760000] physmap platform flash device: 00200000 at 18000000
100[21474537.765000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
101[21474537.770000]  Intel/Sharp Extended Query Table at 0x0039
102[21474537.775000]  Intel/Sharp Extended Query Table at 0x0039
103[21474537.780000]  Intel/Sharp Extended Query Table at 0x0039
104[21474537.785000]  Intel/Sharp Extended Query Table at 0x0039
105[21474537.790000]  Intel/Sharp Extended Query Table at 0x0039
106[21474537.795000] cfi_cmdset_0001: Erase suspend on write enabled
107[21474537.800000] erase region 0: offset=0x0,size=0x2000,blocks=8
108[21474537.805000] erase region 1: offset=0x10000,size=0x10000,blocks=31
109[21474537.810000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
110[21474537.815000] RedBoot partition parsing not available
111[21474537.830000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
112[21474537.835000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
113[21474537.840000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
114[21474537.845000] Bad block table found at page 131008, version 0x01
115[21474537.850000] Bad block table found at page 130944, version 0x01
116[21474537.855000] nand_read_bbt: Bad block at 0x01f60000
117[21474537.860000] nand_read_bbt: Bad block at 0x01fe0000
118[21474537.865000] 6 cmdlinepart partitions found on MTD device neo1973-nand
119[21474537.870000] Creating 6 MTD partitions on "neo1973-nand":
120[21474537.875000] 0x00000000-0x00040000 : "u-boot"
121[21474537.890000] 0x00040000-0x00080000 : "u-boot_env"
122[21474537.900000] 0x00080000-0x00880000 : "kernel"
123[21474537.910000] 0x00880000-0x00920000 : "splash"
124[21474537.920000] 0x00920000-0x00960000 : "factory"
125[21474537.930000] 0x00960000-0x10000000 : "rootfs"
126[21474537.950000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
127[21474537.955000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
128[21474537.965000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
129[21474537.970000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
130[21474538.035000] usb usb1: configuration #1 chosen from 1 choice
131[21474538.040000] hub 1-0:1.0: USB hub found
132[21474538.040000] hub 1-0:1.0: 2 ports detected
133[21474538.055000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
134[21474538.060000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
135[21474538.065000] usb usb1: Product: S3C24XX OHCI
136[21474538.070000] usb usb1: Manufacturer: Linux 2.6.28-GTA02_lindi_1b17c67794364bee-mokodev ohci_hcd
137[21474538.075000] usb usb1: SerialNumber: s3c24xx
138[21474538.085000] usbcore: registered new interface driver cdc_acm
139[21474538.085000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
140[21474538.090000] Initializing USB Mass Storage driver...
141[21474538.095000] usbcore: registered new interface driver usb-storage
142[21474538.100000] USB Mass Storage support registered.
143[21474538.110000] usbcore: registered new interface driver libusual
144[21474538.115000] usbcore: registered new interface driver usbserial
145[21474538.120000] USB Serial support registered for generic
146[21474538.125000] usbcore: registered new interface driver usbserial_generic
147[21474538.130000] usbserial: USB Serial Driver core
148[21474538.135000] USB Serial support registered for GSM modem (1-port)
149[21474538.140000] usbcore: registered new interface driver option
150[21474538.145000] option: v0.7.2:USB Driver for GSM modems
151[21474538.165000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
152[21474538.170000] gta02_udc_command(2)
153[21474538.175000] g_ether gadget: using random self ethernet address
154[21474538.175000] g_ether gadget: using random host ethernet address
155[21474538.185000] usb0: MAC ee:f6:d2:28:0a:9c
156[21474538.185000] usb0: HOST MAC d6:49:37:80:d7:7f
157[21474538.190000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
158[21474538.195000] g_ether gadget: g_ether ready
159[21474538.200000] gta02_udc_command(1)
160[21474538.210000] mice: PS/2 mouse device common for all mice
161[21474538.220000] i2c /dev entries driver
162[21474538.230000] s3c2440-i2c s3c2440-i2c: slave address 0x10
163[21474538.230000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
164[21474538.240000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
165[21474538.245000] **** entering pcf50633_attach_adapter, calling i2c_probe
166[21474538.260000] ************ pcf50633_detect
167[21474538.260000] input: GTA02 PMU events as /class/input/input0
168[21474538.390000] wake enabled for irq 53
169[21474538.395000] pcf50633 0-0073: rtc core: registered pcf50633 as rtc0
170[21474538.450000] pcf50633 0-0073: probe completed
171[21474538.465000] Detected S-Media IRQ# pullup, enabling interrupt
172[21474538.465000] glamo3362 glamo3362.0: Glamo interrupt registered
173[21474538.510000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
174[21474538.520000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
175[21474538.585000] spin_lock_init
176[21474538.590000] glamofb_update_lcd_controller spin_lock_irqsave
177[21474538.590000] glamofb_update_lcd_controller spin_unlock_irqrestore
178[21474538.600000] fbcon_event_notify action=5, data=c781fa40
179[21474538.605000] glamofb_update_lcd_controller spin_lock_irqsave
180[21474538.605000] glamofb_update_lcd_controller spin_unlock_irqrestore
181[21474538.680000] Console: switching to colour frame buffer device 80x58
182[21474538.680000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
183[21474538.755000] fb0: SMedia Glamo frame buffer device
184[21474538.860000] glamo-spi-gpio glamo-spi-gpio.0: registering c046f3a0: jbt6k74
185[21474539.155000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
186[21474539.155000] glamo-mci glamo-mci.0: probe: mapped mci_base:c889a400 irq:0.
187[21474539.160000] glamo-mci glamo-mci.0: ******* glamo_mci_reset
188[21474539.165000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
189[21474539.170000] glamo-mci glamo-mci.0: initialisation done.
190[21474539.180000] mmc_set_power(power_mode=1, vdd=20)
191[21474539.180000] SD power -> 3200mV
192[21474539.185000] s3c2440-ts s3c2440-ts: Starting
193[21474539.190000]   Creating Median ts filter len 31 depth 2 dec 24
194[21474539.195000]   Created Mean ts filter len 8 thresh 18
195[21474539.200000] s3c2440-ts s3c2440-ts: 2 filter(s) initialized
196[21474539.205000] s3c2440-ts s3c2440-ts: successfully loaded
197[21474539.215000] input: s3c2410 TouchScreen as /class/input/input1
198[21474539.335000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Managerment:starting
199[21474539.340000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting
200[21474539.360000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
201[21474539.365000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
202[21474539.370000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
203[21474539.380000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
204[21474539.390000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
205[21474539.395000] glamo-mci glamo-mci.0: Error after cmd: 0x120
206[21474539.400000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
207[21474539.405000] glamo-mci glamo-mci.0: Error after cmd: 0x120
208[21474539.410000] neo1973-pm-host neo1973-pm-host.0: starting
209[21474539.420000] mmc_set_power(power_mode=2, vdd=15)
210[21474539.425000] SD power -> 2700mV
211[21474539.435000] input: lis302-1 (top) as /class/input/input2
212[21474539.460000] lis302dl lis302dl.1: Found lis302-1 (top)
213[21474539.470000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
214[21474539.475000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
215[21474539.480000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
216[21474539.495000] input: lis302-2 (bottom) as /class/input/input3
217[21474539.525000] lis302dl lis302dl.2: Found lis302-2 (bottom)
218[21474539.535000] input: Neo1973 Buttons as /class/input/input4
219[21474539.580000] wake enabled for irq 48
220[21474539.590000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
221[21474539.600000] neo1973-resume neo1973-resume.0: starting
222[21474539.610000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0
223[21474539.620000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
224[21474539.625000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
225[21474539.630000] mmc0: new high speed SD card at address 0007
226[21474539.640000] APM Battery Driver
227[21474539.650000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
228[21474539.665000] Bluetooth: Generic Bluetooth USB driver ver 0.3
229[21474539.670000] usbcore: registered new interface driver btusb
230[21474539.680000] cpuidle: using governor ladder
231[21474539.685000] mmcblk0: mmc0:0007 SD02G 1.90 GiB
232[21474539.690000]  mmcblk0: p1 p2
233[21474539.725000] sdhci: Secure Digital Host Controller Interface driver
234[21474539.730000] sdhci: Copyright(c) Pierre Ossman
235[21474539.745000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
236[21474539.750000] mapped channel 0 to 0
237[21474539.755000] s3c2440-sdi s3c2440-sdi: powered down.
238[21474539.760000] s3c2440-sdi s3c2440-sdi: initialisation done.
239[21474539.770000] HIFInit
240[21474539.785000] Registered led device: neo1973:vibrator
241[21474539.795000] Registered led device: gta02-power:orange
242[21474539.800000] Registered led device: gta02-power:blue
243[21474539.810000] Registered led device: gta02-aux:red
244[21474539.860000] usbcore: registered new interface driver usbhid
245[21474539.865000] usbhid: v2.6:USB HID core driver
246[21474539.885000] logger: created 64K log 'log_main'
247[21474539.890000] logger: created 256K log 'log_events'
248[21474539.895000] logger: created 64K log 'log_radio'
249[21474539.900000] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
250[21474539.910000] ASoC version 0.13.2
251[21474539.925000] WM8753 Audio Codec 0.16
252[21474539.945000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
253[21474539.955000] asoc: WM8753 Voice <-> Bluetooth mapping ok
254[21474539.980000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
255[21474539.990000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
256[21474539.995000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
257[21474540.005000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
258[21474540.015000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
259[21474540.035000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
260[21474540.050000] mmc1: queuing CIS tuple 0x01 length 3
261[21474540.075000] mmc1: queuing CIS tuple 0x1a length 5
262[21474540.090000] mmc1: queuing CIS tuple 0x1b length 8
263[21474540.100000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
264[21474540.110000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
265[21474540.125000] mmc1: queuing CIS tuple 0x80 length 1
266[21474540.135000] mmc1: queuing CIS tuple 0x81 length 1
267[21474540.140000] mmc1: queuing CIS tuple 0x82 length 1
268[21474540.145000] mmc1: new SDIO card at address 0001
269[21474540.265000] ALSA device list:
270[21474540.270000]   #0: neo1973-gta02 (WM8753)
271[21474540.290000] TCP cubic registered
272[21474540.295000] NET: Registered protocol family 17
273[21474540.300000] Bridge firewalling registered
274[21474540.305000] Bluetooth: L2CAP ver 2.11
275[21474540.310000] Bluetooth: L2CAP socket layer initialized
276[21474540.315000] Bluetooth: SCO (Voice Link) ver 0.6
277[21474540.320000] Bluetooth: SCO socket layer initialized
278[21474540.485000] Bluetooth: RFCOMM socket layer initialized
279[21474540.490000] Bluetooth: RFCOMM TTY layer initialized
280[21474540.495000] Bluetooth: RFCOMM ver 1.10
281[21474540.505000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
282[21474540.510000] Bluetooth: BNEP filters: protocol multicast
283[21474540.515000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
284[21474540.695000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
285[21474540.725000] pcf50633 0-0073: setting system clock to 2008-11-25 00:14:01 UTC (1227572041)
286[21474540.735000] Waiting 5sec before mounting root device...
287[21474540.780000] AR6000 Reg Code = 0x40000060
288[21474545.880000] VFS: Mounted root (ext2 filesystem).
289[21474545.890000] Freeing init memory: 180K
290[21474578.045000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
291[21474599.075000] glamofb_update_lcd_controller spin_lock_irqsave
292[21474599.075000] glamofb_update_lcd_controller spin_unlock_irqrestore
293[21474599.100000] fbcon_event_notify action=1, data=c7bdfdf0
294[   71.700000] fbcon_event_notify action=9, data=c7bdfe08
295[   81.755000] fbcon_event_notify action=9, data=c7bdfe08
296[   91.810000] fbcon_event_notify action=9, data=c7bdfe08
297[   97.965000] fbcon_event_notify action=12, data=c7bdfdcc
298[   98.060000] fbcon_event_notify action=9, data=c7bdfe08
299[  137.500000] fbcon_event_notify action=9, data=c7bdfe08
300[  147.555000] fbcon_event_notify action=9, data=c7bdfe08
301[  157.610000] fbcon_event_notify action=9, data=c7bdfe08
302[  224.490000] fbcon_event_notify action=12, data=c7bdfdcc
303[  224.585000] fbcon_event_notify action=9, data=c7bdfe08
304[  262.155000] fbcon_event_notify action=9, data=c7bdfe08
305[  272.210000] fbcon_event_notify action=9, data=c7bdfe08
306[  282.260000] fbcon_event_notify action=9, data=c7bdfe08
307[  367.950000] fbcon_event_notify action=12, data=c7bdfdcc
308[  368.050000] fbcon_event_notify action=9, data=c7bdfe08
309[  424.225000] fbcon_event_notify action=9, data=c7bdfe08
310[  434.280000] fbcon_event_notify action=9, data=c7bdfe08
311[  444.330000] fbcon_event_notify action=9, data=c7bdfe08
312[  504.755000] fbcon_event_notify action=12, data=c7bdfdcc
313[  504.850000] fbcon_event_notify action=9, data=c7bdfe08
314[  541.130000] fbcon_event_notify action=9, data=c7bdfe08
315[  551.185000] fbcon_event_notify action=9, data=c7bdfe08
316[  551.500000] fbcon_event_notify action=12, data=c7bdfdcc
317[  551.560000] fbcon_event_notify action=9, data=c7bdfe08
318[  575.340000] fbcon_event_notify action=9, data=c7bdfe08
319[  585.390000] fbcon_event_notify action=9, data=c7bdfe08
320[  594.705000] fbcon_event_notify action=12, data=c7bdfdcc
321[  594.765000] fbcon_event_notify action=9, data=c7bdfe08
322[  610.560000] PM: Syncing filesystems ... done.
323[  610.595000] glamofb_update_lcd_controller spin_lock_irqsave
324[  610.595000] glamofb_update_lcd_controller spin_unlock_irqrestore
325[  610.745000] Freezing user space processes ... (elapsed 0.02 seconds) done.
326[  610.775000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
327[  610.780000] Suspending console(s) (use no_console_suspend to debug)
328[  610.820000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
329[  610.820000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
330[  610.820000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
331[  610.820000] glamo-mci glamo-mci.0: Error after cmd: 0xc120
332[  610.820000] mmc_set_power(power_mode=0, vdd=0)
333[  610.840000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
334[  610.840000] fbcon_event_notify action=2, data=c720bdd8
335[  610.840000] glamo3362 glamo3362.0: ***** glamo_power -> 1
336[  610.850000] pcf50633 0-0073: pcf50633_suspend
337[  610.990000] gta02_udc_command(2)
338[  611.005000] debug_hdr_ptr: 0x800018b0
339[  612.320000] ar6000_wow interrupt
340[  614.300000] mmc1: card 0001 removed
341[  614.300000] s3c2440-sdi s3c2440-sdi: powered down.
342[  614.300000] s3c2440-sdi s3c2440-sdi: powered down.
343[  614.305000] suspending dma channel 0
344[  614.305000] suspending dma channel 1
345[  614.305000] suspending dma channel 2
346[  614.305000] suspending dma channel 3
347[  614.305000] saved f4000008 value 715d3f8c
348[  614.305000] saved f400001c value 0000f9ff
349[  614.305000] saved fb0000c4 value 00000000
350[  614.305000] saved fb0000c8 value 00000000
351[  614.305000] saved fb0000d4 value 00000972
352[  614.305000] saved fb0000d0 value 01551554
353[  614.305000] saved fb0000d8 value 00001f7e
354[  614.305000] s3c2410_pm_enter(3)
355[  614.305000] s3c2410_sleep_save_phys=0x3720be28
356[  614.305000] saved fb000084 value 00000000
357[  614.305000] saved f4100000 value 00ffffff
358[  614.305000] saved f410000c value 00017fe0
359[  614.305000] saved f4200000 value 2211d1d0
360[  614.305000] saved f4200004 value 00000700
361[  614.305000] saved f4200008 value 00001bc0
362[  614.305000] saved f420000c value 00000700
363[  614.305000] saved f4200010 value 00001f4c
364[  614.305000] saved f4200014 value 00000700
365[  614.305000] saved f4200018 value 00000700
366[  614.305000] saved f4100014 value 00000005
367[  614.305000] saved f4100004 value 0002a010
368[  614.305000] saved f4200024 value 009e03e5
369[  614.305000] saved f4100008 value 00058042
370[  614.305000] saved f4100010 value 00000004
371[  614.305000] Disabling IRQ 16 (pin 160)
372[  614.305000] Leaving IRQ 17 (pin 161) enabled
373[  614.305000] Disabling IRQ 18 (pin 162)
374[  614.305000] Disabling IRQ 19 (pin 163)
375[  614.305000] Leaving IRQ 48 (pin 164) enabled
376[  614.305000] Leaving IRQ 49 (pin 165) enabled
377[  614.305000] Disabling IRQ 50 (pin 166)
378[  614.305000] Disabling IRQ 51 (pin 167)
379[  614.305000] Leaving IRQ 53 (pin 193) enabled
380[  614.305000] Disabling IRQ 56 (pin 196)
381[  614.305000] sleep: irq wakeup masks: fffffffd,fffffdcf
382[  614.305000] GSTATUS3 0x30472414
383[  614.305000] GSTATUS4 0x00000000
384[  614.305000] restore fb000084 (restore 00000000, was 00000000)
385[  614.305000] GPIO[0] CON 007e5fff => 007e5fff, DAT 00010000 => 00010000
386[  614.305000] GPIO[1] CON 00155555 => 00155555, DAT 00000080 => 00000080
387[  614.305000] GPIO[2] CON 55555155 => 55555155, DAT 0000a000 => 0000a000
388[  614.305000] GPIO[3] CON 55555555 => 55555555, DAT 00002019 => 00002019
389[  614.305000] GPIO[4] CON aaaaa6aa => aaaaa6aa, DAT 0000ffcd => 0000ffdf
390[  614.305000] GPIO[5] CON 00000a08 => 0000aaaa, DAT 00000020 => 00000025
391[  614.305000] GPIO[6] CON 01aa5079 => 01aa5279, DAT 00006e34 => 00006f36
392[  614.305000] GPIO[7] CON 000000aa => 001aa9aa, DAT 000006ee => 000002ec
393[  614.305000] post sleep: IRQs 0x0200002d, 0x00010200
394[  614.305000] IRQ 53 asserted at resume
395[  614.305000] post sleep, preparing to return
396[  614.305000] S3C2410 PM Resume (post-restore)
397[  614.305000] restore fb0000c4 (restore 00000000, was 00000000)
398[  614.305000] restore fb0000c8 (restore 00000000, was 00000000)
399[  614.305000] restore fb0000d4 (restore 00000972, was 00000972)
400[  614.305000] restore fb0000d0 (restore 01551554, was 01551554)
401[  614.305000] restore fb0000d8 (restore 00001f7e, was 00001f7e)
402[  614.305000] restore f4000008 (restore 715d3f8c, was ffffffff)
403[  614.305000] restore f400001c (restore 0000f9ff, was 0000ffff)
404[  614.305000] dma0: restoring configuration
405[  614.305000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
406[  614.305000] gta02_udc_command(1)
407[  614.305000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
408[  614.305000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
409[  614.305000] s3c2440-i2c s3c2440-i2c: slave address 0x10
410[  614.305000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
411[  614.305000] ##### callback_all_resume_dependencies(head=c0487c5c)
412[  614.305000] ##### callback_all_resume_dependencies(head=c0487d38)
413[  614.305000] ##### callback_all_resume_dependencies(head=c0487e14)
414[  614.365000] glamo3362 glamo3362.0: ***** glamo_power -> 0
415[  614.370000] spin_lock_init
416[  614.370000] glamofb_update_lcd_controller spin_lock_irqsave
417[  614.370000] glamofb_update_lcd_controller spin_unlock_irqrestore
418[  614.375000] fbcon_event_notify action=3, data=c720bdd8
419[  614.445000] jbt6k74 spi2.0: **** jbt6k74 resume start
420[  614.670000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
421[  614.690000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
422[  614.695000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
423[  614.695000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
424[  614.700000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
425[  614.720000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
426[  614.735000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
427[  614.745000] pcf50633 0-0073: pcf50633_backlight_resume
428[  614.745000] mmc1: queuing CIS tuple 0x01 length 3
429[  614.765000] mmc1: queuing CIS tuple 0x1a length 5
430[  614.775000] mmc1: queuing CIS tuple 0x1b length 8
431[  614.775000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
432[  614.775000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
433[  614.780000] mmc1: queuing CIS tuple 0x80 length 1
434[  614.780000] mmc1: queuing CIS tuple 0x81 length 1
435[  614.780000] mmc1: queuing CIS tuple 0x82 length 1
436[  614.780000] mmc1: new SDIO card at address 0001
437[  614.780000] mmc mmc1:0001: parent mmc1 should not be sleeping
438[  614.905000] jbt6k74 spi2.0: **** jbt6k74 resume end
439[  614.905000] glamo-mci glamo-mci.0: IGNORING glamo_mci_reset while suspended
440[  614.905000] mmc_set_power(power_mode=1, vdd=20)
441[  614.905000] SD power -> 3200mV
442[  614.935000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
443[  614.935000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
444[  614.940000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
445[  614.940000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
446[  615.405000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
447[  615.410000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
448[  615.410000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
449[  615.410000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
450[  615.415000] soc-audio soc-audio: scheduling resume work
451[  615.425000] Restarting tasks ... done.
452[  615.470000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
453[  615.570000] AR6000 Reg Code = 0x40000060
454[  615.760000] soc-audio soc-audio: starting resume work
455[  616.485000] soc-audio soc-audio: resume work completed
456[  616.615000] glamofb_update_lcd_controller spin_lock_irqsave
457[  616.615000] glamofb_update_lcd_controller spin_unlock_irqrestore
458[  616.620000] fbcon_event_notify action=1, data=c7bdfdf0
459[  633.820000] fbcon_event_notify action=9, data=c7bdfe08
460[  643.880000] fbcon_event_notify action=9, data=c7bdfe08
461[  653.935000] fbcon_event_notify action=9, data=c7bdfe08
462[  663.945000] fbcon_event_notify action=12, data=c7bdfdcc
463[  664.035000] fbcon_event_notify action=9, data=c7bdfe08
464[  684.100000] fbcon_event_notify action=9, data=c7bdfe08
465[  694.155000] fbcon_event_notify action=9, data=c7bdfe08
466[  704.210000] fbcon_event_notify action=9, data=c7bdfe08
467[  851.505000] AR6000 connected event on freq 2432 with bssid 00:1e:e5:45:de:96  listenInterval=100, beaconInterval = 100, beaconIeLen = 0 assocReqLen=42 assocRespLen =59
468[  851.510000] Network: Infrastructure
469[  995.860000] fbcon_event_notify action=12, data=c7bdfdcc
470[  995.955000] fbcon_event_notify action=9, data=c7bdfe08
471[ 1015.140000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
472[ 1064.395000] fbcon_event_notify action=9, data=c7bdfe08
473[ 1074.450000] fbcon_event_notify action=9, data=c7bdfe08
474[ 1084.505000] fbcon_event_notify action=9, data=c7bdfe08
475[ 1122.830000] fbcon_event_notify action=12, data=c7bdfdcc
476[ 1122.925000] fbcon_event_notify action=9, data=c7bdfe08
477[ 1362.435000] fbcon_event_notify action=9, data=c7bdfe08
478[ 1364.230000] fbcon_event_notify action=12, data=c7bdfdcc
479[ 1364.290000] fbcon_event_notify action=9, data=c7bdfe08
480[ 4743.545000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
481[ 4744.155000] fbcon_event_notify action=9, data=c7bdfe08
482[ 4745.670000] fbcon_event_notify action=12, data=c7bdfdcc
483[ 4745.730000] fbcon_event_notify action=9, data=c7bdfe08
484[ 4768.675000] fbcon_event_notify action=9, data=c7bdfe08
485[ 4778.730000] fbcon_event_notify action=9, data=c7bdfe08
486[ 4788.785000] fbcon_event_notify action=9, data=c7bdfe08
487[14967.925000] glamo-mci glamo-mci.0: ****** insanity timeout
488[14967.925000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
489[14967.930000] mmcblk0: error -110 sending read/write command
490[14967.935000] end_request: I/O error, dev mmcblk0, sector 3166992
491[14978.420000] glamo-mci glamo-mci.0: ****** insanity timeout
492[14978.420000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
493[14978.430000] mmcblk0: error -110 sending read/write command
494[14978.430000] end_request: I/O error, dev mmcblk0, sector 3650376
495[15017.465000] glamo-mci glamo-mci.0: ****** insanity timeout
496[15017.465000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
497[15017.475000] mmcblk0: error -110 sending read/write command
498[15017.475000] end_request: I/O error, dev mmcblk0, sector 3890592
499[15084.525000] glamo-mci glamo-mci.0: ****** insanity timeout
500[15084.525000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
501[15084.530000] mmcblk0: error -110 sending read/write command
502[15084.535000] end_request: I/O error, dev mmcblk0, sector 3908832
503[15087.815000] glamo-mci glamo-mci.0: ****** insanity timeout
504[15087.815000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
505[15087.825000] mmcblk0: error -110 sending read/write command
506[15087.825000] end_request: I/O error, dev mmcblk0, sector 3908232
507[15238.145000] glamo-mci glamo-mci.0: ****** insanity timeout
508[15238.145000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
509[15238.155000] mmcblk0: error -110 sending read/write command
510[15238.155000] end_request: I/O error, dev mmcblk0, sector 565568
511[15286.305000] glamo-mci glamo-mci.0: ****** insanity timeout
512[15286.305000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
513[15286.310000] mmcblk0: error -110 sending read/write command
514[15286.315000] end_request: I/O error, dev mmcblk0, sector 680624
515[15290.950000] glamo-mci glamo-mci.0: ****** insanity timeout
516[15290.950000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
517[15290.960000] mmcblk0: error -110 sending read/write command
518[15290.965000] end_request: I/O error, dev mmcblk0, sector 678272
519[15338.325000] glamo-mci glamo-mci.0: ****** insanity timeout
520[15338.330000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
521[15338.335000] mmcblk0: error -110 sending read/write command
522[15338.340000] end_request: I/O error, dev mmcblk0, sector 782408
523[15345.860000] glamo-mci glamo-mci.0: ****** insanity timeout
524[15345.860000] glamo-mci glamo-mci.0: Error after cmd: 0xc300
525[15345.870000] mmcblk0: error -110 sending read/write command
526[15345.870000] end_request: I/O error, dev mmcblk0, sector 848496
527[34989.370000] fbcon_event_notify action=12, data=c7bdfdcc
528[34989.465000] fbcon_event_notify action=9, data=c7bdfe08
529[35018.590000] fbcon_event_notify action=9, data=c7bdfe08
530[35028.645000] fbcon_event_notify action=9, data=c7bdfe08
531[35038.700000] fbcon_event_notify action=9, data=c7bdfe08
532[35461.315000] fbcon_event_notify action=12, data=c7bdfdcc
533[35461.405000] fbcon_event_notify action=9, data=c7bdfe08
534[35475.665000] PM: Syncing filesystems ... done.
535[35475.780000] glamofb_update_lcd_controller spin_lock_irqsave
536[35475.780000] glamofb_update_lcd_controller spin_unlock_irqrestore
537[35475.930000] Freezing user space processes ... (elapsed 0.09 seconds) done.
538[35476.035000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
539[35476.045000] Suspending console(s) (use no_console_suspend to debug)
540[35476.085000] glamo-mci glamo-mci.0: Error after cmd: 0xc120
541[35476.085000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
542[35476.085000] glamo-mci glamo-mci.0: Error after cmd: 0xc120
543[35476.085000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
544[35476.085000] mmc_set_power(power_mode=0, vdd=0)
545[35476.105000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
546[35476.105000] fbcon_event_notify action=2, data=c1295dd8
547[35476.105000] glamo3362 glamo3362.0: ***** glamo_power -> 1
548[35476.115000] pcf50633 0-0073: pcf50633_suspend
549[35476.255000] gta02_udc_command(2)
550[35476.270000] debug_hdr_ptr: 0x800018b0
551[35479.665000] ar6000_wow interrupt
552[35481.620000] mmc1: card 0001 removed
553[35481.620000] s3c2440-sdi s3c2440-sdi: powered down.
554[35481.620000] s3c2440-sdi s3c2440-sdi: powered down.
555[35481.620000] suspending dma channel 0
556[35481.620000] suspending dma channel 1
557[35481.620000] suspending dma channel 2
558[35481.620000] suspending dma channel 3
559[35481.620000] saved f4000008 value 715d3f8c
560[35481.620000] saved f400001c value 0000f9ff
561[35481.620000] saved fb0000c4 value 00000000
562[35481.620000] saved fb0000c8 value 00000000
563[35481.620000] saved fb0000d4 value 00000972
564[35481.620000] saved fb0000d0 value 01551554
565[35481.620000] saved fb0000d8 value 00001f7e
566[35481.620000] s3c2410_pm_enter(3)
567[35481.620000] s3c2410_sleep_save_phys=0x31295e28
568[35481.620000] saved fb000084 value 00000000
569[35481.620000] saved f4100000 value 00ffffff
570[35481.620000] saved f410000c value 00017fe0
571[35481.620000] saved f4200000 value 2211d1d0
572[35481.620000] saved f4200004 value 00000700
573[35481.620000] saved f4200008 value 00001bc0
574[35481.620000] saved f420000c value 00000700
575[35481.620000] saved f4200010 value 00001f4c
576[35481.620000] saved f4200014 value 00000700
577[35481.620000] saved f4200018 value 00000700
578[35481.620000] saved f4100014 value 00000005
579[35481.620000] saved f4100004 value 0002a010
580[35481.620000] saved f4200024 value 009e03e5
581[35481.620000] saved f4100008 value 00058042
582[35481.620000] saved f4100010 value 00000004
583[35481.620000] Disabling IRQ 16 (pin 160)
584[35481.620000] Leaving IRQ 17 (pin 161) enabled
585[35481.620000] Disabling IRQ 18 (pin 162)
586[35481.620000] Disabling IRQ 19 (pin 163)
587[35481.620000] Leaving IRQ 48 (pin 164) enabled
588[35481.620000] Leaving IRQ 49 (pin 165) enabled
589[35481.620000] Disabling IRQ 50 (pin 166)
590[35481.620000] Disabling IRQ 51 (pin 167)
591[35481.620000] Leaving IRQ 53 (pin 193) enabled
592[35481.620000] Disabling IRQ 56 (pin 196)
593[35481.620000] sleep: irq wakeup masks: fffffffd,fffffdcf
594[35481.620000] GSTATUS3 0x30472414
595[35481.620000] GSTATUS4 0x00000200
596[35481.620000] restore fb000084 (restore 00000000, was 00000000)
597[35481.620000] GPIO[0] CON 007e5fff => 007e5fff, DAT 00010000 => 00010000
598[35481.620000] GPIO[1] CON 00155555 => 00155555, DAT 00000080 => 00000080
599[35481.620000] GPIO[2] CON 55555155 => 55555155, DAT 0000a000 => 0000a000
600[35481.620000] GPIO[3] CON 55555555 => 55555555, DAT 00002019 => 00002019
601[35481.620000] GPIO[4] CON aaaaa6aa => aaaaa6aa, DAT 0000ffcd => 0000ffdd
602[35481.620000] GPIO[5] CON 00000a08 => 0000aaaa, DAT 00000020 => 00000025
603[35481.620000] GPIO[6] CON 01aa5079 => 01aa5279, DAT 00006e34 => 00006f36
604[35481.620000] GPIO[7] CON 000000aa => 001aa9aa, DAT 000006ee => 000002ec
605[35481.620000] post sleep: IRQs 0x0200002d, 0x00010200
606[35481.620000] IRQ 53 asserted at resume
607[35481.620000] post sleep, preparing to return
608[35481.620000] S3C2410 PM Resume (post-restore)
609[35481.620000] restore fb0000c4 (restore 00000000, was 00000000)
610[35481.620000] restore fb0000c8 (restore 00000000, was 00000000)
611[35481.620000] restore fb0000d4 (restore 00000972, was 00000972)
612[35481.620000] restore fb0000d0 (restore 01551554, was 01551554)
613[35481.620000] restore fb0000d8 (restore 00001f7e, was 00001f7e)
614[35481.620000] restore f4000008 (restore 715d3f8c, was ffffffff)
615[35481.620000] restore f400001c (restore 0000f9ff, was 0000ffff)
616[35481.620000] dma0: restoring configuration
617[35481.620000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
618[35481.620000] gta02_udc_command(1)
619[35481.620000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
620[35481.620000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
621[35481.620000] s3c2440-i2c s3c2440-i2c: slave address 0x10
622[35481.620000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
623[35481.620000] ##### callback_all_resume_dependencies(head=c0487c5c)
624[35481.620000] ##### callback_all_resume_dependencies(head=c0487d38)
625[35481.620000] ##### callback_all_resume_dependencies(head=c0487e14)
626[35481.680000] glamo3362 glamo3362.0: ***** glamo_power -> 0
627[35481.685000] spin_lock_init
628[35481.685000] glamofb_update_lcd_controller spin_lock_irqsave
629[35481.685000] glamofb_update_lcd_controller spin_unlock_irqrestore
630[35481.690000] fbcon_event_notify action=3, data=c1295dd8
631[35481.760000] jbt6k74 spi2.0: **** jbt6k74 resume start
632[35481.985000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
633[35482.005000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
634[35482.010000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
635[35482.010000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
636[35482.015000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
637[35482.020000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
638[35482.035000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
639[35482.045000] mmc1: queuing CIS tuple 0x01 length 3
640[35482.065000] mmc1: queuing CIS tuple 0x1a length 5
641[35482.070000] pcf50633 0-0073: pcf50633_backlight_resume
642[35482.070000] mmc1: queuing CIS tuple 0x1b length 8
643[35482.075000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
644[35482.075000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
645[35482.080000] mmc1: queuing CIS tuple 0x80 length 1
646[35482.080000] mmc1: queuing CIS tuple 0x81 length 1
647[35482.080000] mmc1: queuing CIS tuple 0x82 length 1
648[35482.080000] mmc1: new SDIO card at address 0001
649[35482.080000] mmc mmc1:0001: parent mmc1 should not be sleeping
650[35482.205000] jbt6k74 spi2.0: **** jbt6k74 resume end
651[35482.205000] glamo-mci glamo-mci.0: IGNORING glamo_mci_reset while suspended
652[35482.205000] mmc_set_power(power_mode=1, vdd=20)
653[35482.205000] SD power -> 3200mV
654[35482.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
655[35482.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
656[35482.240000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
657[35482.240000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
658[35482.690000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
659[35482.695000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
660[35482.695000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
661[35482.695000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
662[35482.700000] soc-audio soc-audio: scheduling resume work
663[35482.710000] Restarting tasks ... done.
664[35483.045000] soc-audio soc-audio: starting resume work
665[35483.780000] soc-audio soc-audio: resume work completed
666[35483.995000] glamofb_update_lcd_controller spin_lock_irqsave
667[35483.995000] glamofb_update_lcd_controller spin_unlock_irqrestore
668[35484.000000] fbcon_event_notify action=1, data=c7bdfdf0
669[35500.540000] fbcon_event_notify action=9, data=c7bdfe08
670[35510.590000] fbcon_event_notify action=9, data=c7bdfe08
671[35520.645000] fbcon_event_notify action=9, data=c7bdfe08
672[35583.420000] fbcon_event_notify action=12, data=c7bdfdcc
673[35583.510000] fbcon_event_notify action=9, data=c7bdfe08
674[35634.650000] fbcon_event_notify action=9, data=c7bdfe08
675[35639.185000] fbcon_event_notify action=12, data=c7bdfdcc
676[35639.255000] fbcon_event_notify action=9, data=c7bdfe08
677[35724.665000] fbcon_event_notify action=9, data=c7bdfe08
678[35725.515000] fbcon_event_notify action=12, data=c7bdfdcc
679[35725.575000] fbcon_event_notify action=9, data=c7bdfe08
680[35767.820000] PM: Syncing filesystems ... done.
681[35767.860000] glamofb_update_lcd_controller spin_lock_irqsave
682[35767.860000] glamofb_update_lcd_controller spin_unlock_irqrestore
683[35768.010000] Freezing user space processes ... (elapsed 0.09 seconds) done.
684[35768.115000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
685[35768.125000] Suspending console(s) (use no_console_suspend to debug)
686[35768.165000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
687[35768.165000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
688[35768.165000] glamo-mci glamo-mci.0: Error after cmd: 0x4120
689[35768.165000] glamo-mci glamo-mci.0: Error after cmd: 0xc120
690[35768.165000] mmc_set_power(power_mode=0, vdd=0)
691[35768.185000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
692[35768.185000] fbcon_event_notify action=2, data=c3d71dd8
693[35768.185000] glamo3362 glamo3362.0: ***** glamo_power -> 1
694[35768.195000] pcf50633 0-0073: pcf50633_suspend
695[35768.335000] gta02_udc_command(2)
696[35768.340000] mmc1: card 0001 removed
697[35768.340000] s3c2440-sdi s3c2440-sdi: powered down.
698[35768.340000] s3c2440-sdi s3c2440-sdi: powered down.
699[35768.340000] suspending dma channel 0
700[35768.340000] suspending dma channel 1
701[35768.340000] suspending dma channel 2
702[35768.340000] suspending dma channel 3
703[35768.340000] saved f4000008 value 715d3f8c
704[35768.340000] saved f400001c value 0000f9ff
705[35768.340000] saved fb0000c4 value 00000000
706[35768.340000] saved fb0000c8 value 00000000
707[35768.340000] saved fb0000d4 value 00000972
708[35768.340000] saved fb0000d0 value 01551554
709[35768.340000] saved fb0000d8 value 00001f7e
710[35768.340000] s3c2410_pm_enter(3)
711[35768.340000] s3c2410_sleep_save_phys=0x33d71e28
712[35768.340000] saved fb000084 value 00000000
713[35768.340000] saved f4100000 value 00ffffff
714[35768.340000] saved f410000c value 00017fe0
715[35768.340000] saved f4200000 value 2211d1d0
716[35768.340000] saved f4200004 value 00000700
717[35768.340000] saved f4200008 value 00001bc0
718[35768.340000] saved f420000c value 00000700
719[35768.340000] saved f4200010 value 00001f4c
720[35768.340000] saved f4200014 value 00000700
721[35768.340000] saved f4200018 value 00000700
722[35768.340000] saved f4100014 value 00000005
723[35768.340000] saved f4100004 value 0002a010
724[35768.340000] saved f4200024 value 009e03e5
725[35768.340000] saved f4100008 value 00058042
726[35768.340000] saved f4100010 value 00000004
727[35768.340000] Disabling IRQ 16 (pin 160)
728[35768.340000] Leaving IRQ 17 (pin 161) enabled
729[35768.340000] Disabling IRQ 18 (pin 162)
730[35768.340000] Disabling IRQ 19 (pin 163)
731[35768.340000] Leaving IRQ 48 (pin 164) enabled
732[35768.340000] Leaving IRQ 49 (pin 165) enabled
733[35768.340000] Disabling IRQ 50 (pin 166)
734[35768.340000] Disabling IRQ 51 (pin 167)
735[35768.340000] Leaving IRQ 53 (pin 193) enabled
736[35768.340000] Disabling IRQ 56 (pin 196)
737[35768.340000] sleep: irq wakeup masks: fffffffd,fffffdcf
738[35768.340000] GSTATUS3 0x30472414
739[35768.340000] GSTATUS4 0x00000200
740[35768.340000] restore fb000084 (restore 00000000, was 00000000)
741[35768.340000] GPIO[0] CON 007e5fff => 007e5fff, DAT 00010000 => 00010000
742[35768.340000] GPIO[1] CON 00155555 => 00155555, DAT 00000080 => 00000080
743[35768.340000] GPIO[2] CON 55555155 => 55555155, DAT 0000a000 => 0000a000
744[35768.340000] GPIO[3] CON 55555555 => 55555555, DAT 00002019 => 00002019
745[35768.340000] GPIO[4] CON aaaaa6aa => aaaaa6aa, DAT 0000ffcd => 0000ffdf
746[35768.340000] GPIO[5] CON 00000a08 => 0000aaaa, DAT 00000020 => 00000025
747[35768.340000] GPIO[6] CON 01aa5079 => 01aa5279, DAT 00006e34 => 00006f36
748[35768.340000] GPIO[7] CON 000000aa => 001aa9aa, DAT 000006ee => 000002ec
749[35768.340000] post sleep: IRQs 0x0200002d, 0x00010200
750[35768.340000] IRQ 53 asserted at resume
751[35768.340000] post sleep, preparing to return
752[35768.340000] S3C2410 PM Resume (post-restore)
753[35768.340000] restore fb0000c4 (restore 00000000, was 00000000)
754[35768.340000] restore fb0000c8 (restore 00000000, was 00000000)
755[35768.340000] restore fb0000d4 (restore 00000972, was 00000972)
756[35768.340000] restore fb0000d0 (restore 01551554, was 01551554)
757[35768.340000] restore fb0000d8 (restore 00001f7e, was 00001f7e)
758[35768.340000] restore f4000008 (restore 715d3f8c, was ffffffff)
759[35768.340000] restore f400001c (restore 0000f9ff, was 0000ffff)
760[35768.340000] dma0: restoring configuration
761[35768.340000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
762[35768.340000] gta02_udc_command(1)
763[35768.340000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
764[35768.340000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
765[35768.340000] s3c2440-i2c s3c2440-i2c: slave address 0x10
766[35768.340000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
767[35768.340000] ##### callback_all_resume_dependencies(head=c0487c5c)
768[35768.340000] ##### callback_all_resume_dependencies(head=c0487d38)
769[35768.340000] ##### callback_all_resume_dependencies(head=c0487e14)
770[35768.405000] glamo3362 glamo3362.0: ***** glamo_power -> 0
771[35768.410000] spin_lock_init
772[35768.410000] glamofb_update_lcd_controller spin_lock_irqsave
773[35768.410000] glamofb_update_lcd_controller spin_unlock_irqrestore
774[35768.415000] fbcon_event_notify action=3, data=c3d71dd8
775[35768.485000] jbt6k74 spi2.0: **** jbt6k74 resume start
776[35768.710000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
777[35768.730000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
778[35768.735000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
779[35768.735000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
780[35768.740000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
781[35768.745000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
782[35768.760000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).
783[35768.770000] mmc1: queuing CIS tuple 0x01 length 3
784[35768.790000] mmc1: queuing CIS tuple 0x1a length 5
785[35768.795000] pcf50633 0-0073: pcf50633_backlight_resume
786[35768.795000] mmc1: queuing CIS tuple 0x1b length 8
787[35768.800000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
788[35768.800000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
789[35768.800000] mmc1: queuing CIS tuple 0x80 length 1
790[35768.805000] mmc1: queuing CIS tuple 0x81 length 1
791[35768.805000] mmc1: queuing CIS tuple 0x82 length 1
792[35768.805000] mmc1: new SDIO card at address 0001
793[35768.805000] mmc mmc1:0001: parent mmc1 should not be sleeping
794[35768.895000] jbt6k74 spi2.0: **** jbt6k74 resume end
795[35768.895000] glamo-mci glamo-mci.0: IGNORING glamo_mci_reset while suspended
796[35768.895000] mmc_set_power(power_mode=1, vdd=20)
797[35768.895000] SD power -> 3200mV
798[35768.925000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
799[35768.925000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
800[35768.930000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
801[35768.930000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
802[35769.010000] kmmcd: page allocation failure. order:4, mode:0xd0
803[35769.010000] [<c0365370>] (dump_stack+0x0/0x14) from [<c0091158>] (__alloc_pages_internal+0x3c0/0x3e8)
804[35769.010000] [<c0090d98>] (__alloc_pages_internal+0x0/0x3e8) from [<c00b05f8>] (cache_grow+0xc8/0x354)
805[35769.010000] [<c00b0530>] (cache_grow+0x0/0x354) from [<c00b0a84>] (cache_alloc_refill+0x200/0x264)
806[35769.010000] [<c00b0884>] (cache_alloc_refill+0x0/0x264) from [<c00b0b88>] (__kmalloc+0xa0/0xdc)
807[35769.010000] [<c00b0ae8>] (__kmalloc+0x0/0xdc) from [<c02dadc4>] (alloc_netdev_mq+0x50/0x164)
808[35769.010000]  r7:00000001 r6:00000000 r5:c79fc768 r4:c79fc000
809[35769.010000] [<c02dad74>] (alloc_netdev_mq+0x0/0x164) from [<c02e8240>] (alloc_etherdev_mq+0x1c/0x28)
810[35769.010000] [<c02e8224>] (alloc_etherdev_mq+0x0/0x28) from [<c027852c>] (ar6000_avail_ev+0x30/0x3c4)
811[35769.010000] [<c02784fc>] (ar6000_avail_ev+0x0/0x3c4) from [<c0273a40>] (HTCTargetInsertedHandler+0x17c/0x1c4)
812[35769.010000]  r8:00000000 r7:c79fcdb8 r6:00000006 r5:c79fc768 r4:c79fc000
813[35769.010000] [<c02738c4>] (HTCTargetInsertedHandler+0x0/0x1c4) from [<c02743dc>] (sdio_ar6000_probe+0x1ac/0x27c)
814[35769.010000] [<c0274230>] (sdio_ar6000_probe+0x0/0x27c) from [<c026a1dc>] (sdio_bus_probe+0xd4/0xf0)
815[35769.010000]  r8:c7a2a808 r7:c0493eb4 r6:c7a2a400 r5:c0386808 r4:00000000
816[35769.010000] [<c026a108>] (sdio_bus_probe+0x0/0xf0) from [<c01d3128>] (really_probe+0x120/0x28c)
817[35769.010000]  r7:c0493eb4 r6:c7a2a408 r5:c0493eb4 r4:00000000
818[35769.010000] [<c01d3008>] (really_probe+0x0/0x28c) from [<c01d336c>] (driver_probe_device+0xd8/0xf4)
819[35769.010000]  r7:c7865e30 r6:c7a2a408 r5:c0493eb4 r4:00000000
820[35769.010000] [<c01d3294>] (driver_probe_device+0x0/0xf4) from [<c01d3420>] (__device_attach+0x10/0x14)
821[35769.010000]  r6:c7a2a408 r5:c01d3410 r4:00000000
822[35769.010000] [<c01d3410>] (__device_attach+0x0/0x14) from [<c01d2468>] (bus_for_each_drv+0x5c/0x9c)
823[35769.010000] [<c01d240c>] (bus_for_each_drv+0x0/0x9c) from [<c01d34a4>] (device_attach+0x58/0x70)
824[35769.010000]  r7:c7a2a4f0 r6:00000000 r5:c7a2a534 r4:c7a2a408
825[35769.010000] [<c01d344c>] (device_attach+0x0/0x70) from [<c01d2190>] (bus_attach_device+0x30/0x64)
826[35769.010000]  r5:c7a2a408 r4:c0493b2c
827[35769.010000] [<c01d2160>] (bus_attach_device+0x0/0x64) from [<c01d03c4>] (device_add+0x214/0x370)
828[35769.010000]  r5:c7a2a408 r4:00000000
829[35769.010000] [<c01d01b0>] (device_add+0x0/0x370) from [<c0269fc4>] (sdio_add_func+0x34/0x4c)
830[35769.010000]  r8:00000001 r7:00000002 r6:c7a02800 r5:c7a2a400 r4:c7a2a408
831[35769.010000] [<c0269f90>] (sdio_add_func+0x0/0x4c) from [<c02699bc>] (mmc_attach_sdio+0x2f8/0x3a8)
832[35769.010000]  r5:00000000 r4:00000000
833[35769.010000] [<c02696c4>] (mmc_attach_sdio+0x0/0x3a8) from [<c0265dac>] (mmc_rescan+0x100/0x210)
834[35769.010000]  r8:00000000 r7:c7a02aa8 r6:c7a02aa8 r5:c7865f1c r4:c7a02800
835[35769.010000] [<c0265cac>] (mmc_rescan+0x0/0x210) from [<c006895c>] (run_workqueue+0x128/0x224)
836[35769.010000]  r6:c7864000 r5:c7870f20 r4:c7a02aac
837[35769.010000] [<c0068834>] (run_workqueue+0x0/0x224) from [<c0068e50>] (worker_thread+0x100/0x114)
838[35769.010000] [<c0068d50>] (worker_thread+0x0/0x114) from [<c006cd4c>] (kthread+0x60/0x94)
839[35769.010000]  r8:00000000 r7:00000000 r6:c0068d50 r5:c7870f20 r4:c7864000
840[35769.010000] [<c006ccec>] (kthread+0x0/0x94) from [<c005ac64>] (do_exit+0x0/0x2a4)
841[35769.010000]  r6:00000000 r5:00000000 r4:00000000
842[35769.010000] Mem-info:
843[35769.010000] Normal per-cpu:
844[35769.010000] CPU    0: hi:   42, btch:   7 usd:   0
845[35769.010000] Active_anon:4421 active_file:2820 inactive_anon:4466
846[35769.010000]  inactive_file:15141 unevictable:0 dirty:0 writeback:0 unstable:0
847[35769.010000]  free:860 slab:1559 mapped:2319 pagetables:184 bounce:0
848[35769.010000] Normal free:3440kB min:1440kB low:1800kB high:2160kB active_anon:17684kB inactive_anon:17864kB active_file:11280kB inactive_file:60564kB unevictable:0kB present:130048kB pages_scanned:0 all_unreclaimable? no
849[35769.010000] lowmem_reserve[]: 0 0
850[35769.010000] Normal: 468*4kB 104*8kB 30*16kB 4*32kB 2*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3440kB
851[35769.010000] 17993 total pagecache pages
852[35769.010000] 0 pages in swap cache
853[35769.015000] Swap cache stats: add 0, delete 0, find 0/0
854[35769.015000] Free swap  = 0kB
855[35769.015000] Total swap = 0kB
856[35769.025000] 32768 pages of RAM
857[35769.025000] 1041 free pages
858[35769.025000] 2840 reserved pages
859[35769.025000] 1559 slab pages
860[35769.025000] 8366 pages shared
861[35769.025000] 0 pages swap cached
862[35769.025000] alloc_netdev: Unable to allocate device.
863[35769.260000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
864[35769.265000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
865[35769.265000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
866[35769.265000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
867[35769.270000] soc-audio soc-audio: scheduling resume work
868[35769.280000] Restarting tasks ... done.
869[35769.655000] soc-audio soc-audio: starting resume work
870[35770.455000] soc-audio soc-audio: resume work completed
871[35770.605000] glamofb_update_lcd_controller spin_lock_irqsave
872[35770.605000] glamofb_update_lcd_controller spin_unlock_irqrestore
873[35770.610000] fbcon_event_notify action=1, data=c7bdfdf0
874[35781.075000] fbcon_event_notify action=9, data=c7bdfe08
875[35791.130000] fbcon_event_notify action=9, data=c7bdfe08
876[35801.180000] fbcon_event_notify action=9, data=c7bdfe08