| 1 | root@om-gta02:~# dmesg |
|---|
| 2 | audio soc-audio: scheduling resume work |
|---|
| 3 | PM: Finishing wakeup. |
|---|
| 4 | Restarting tasks ... <6>soc-audio soc-audio: starting resume work |
|---|
| 5 | done. |
|---|
| 6 | soc-audio soc-audio: resume work completed |
|---|
| 7 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 8 | Syncing filesystems ... done. |
|---|
| 9 | PM: Preparing system for mem sleep |
|---|
| 10 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 11 | Freezing user space processes ... (elapsed 0.05 seconds) done. |
|---|
| 12 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 13 | PM: Entering mem sleep |
|---|
| 14 | Suspending console(s) |
|---|
| 15 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 16 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 17 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 18 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 19 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 20 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 21 | gta02_udc_command(2) |
|---|
| 22 | suspending dma channel 0 |
|---|
| 23 | suspending dma channel 1 |
|---|
| 24 | suspending dma channel 2 |
|---|
| 25 | suspending dma channel 3 |
|---|
| 26 | GSTATUS3 0x3036c0dc |
|---|
| 27 | GSTATUS4 0x00000002 |
|---|
| 28 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 29 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 30 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 31 | gta02_udc_command(1) |
|---|
| 32 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 33 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 34 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 35 | timer_usec_ticks = 7864 |
|---|
| 36 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 37 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 38 | SD power -> 3200mV |
|---|
| 39 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 40 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 41 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 42 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 43 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 44 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 45 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 46 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 47 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 48 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 49 | soc-audio soc-audio: scheduling resume work |
|---|
| 50 | PM: Finishing wakeup. |
|---|
| 51 | Restarting tasks ... <6>soc-audio soc-audio: starting resume work |
|---|
| 52 | done. |
|---|
| 53 | soc-audio soc-audio: resume work completed |
|---|
| 54 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 55 | ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready |
|---|
| 56 | usb0: no IPv6 routers present |
|---|
| 57 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 58 | Syncing filesystems ... done. |
|---|
| 59 | PM: Preparing system for mem sleep |
|---|
| 60 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 61 | Freezing user space processes ... (elapsed 0.02 seconds) done. |
|---|
| 62 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 63 | PM: Entering mem sleep |
|---|
| 64 | Suspending console(s) |
|---|
| 65 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 66 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 67 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 68 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 69 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 70 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 71 | gta02_udc_command(2) |
|---|
| 72 | suspending dma channel 0 |
|---|
| 73 | suspending dma channel 1 |
|---|
| 74 | suspending dma channel 2 |
|---|
| 75 | suspending dma channel 3 |
|---|
| 76 | GSTATUS3 0x3036c0dc |
|---|
| 77 | GSTATUS4 0x00000200 |
|---|
| 78 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 79 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 80 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 81 | gta02_udc_command(1) |
|---|
| 82 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 83 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 84 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 85 | timer_usec_ticks = 7864 |
|---|
| 86 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 87 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 88 | SD power -> 3200mV |
|---|
| 89 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 90 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 91 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 92 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 93 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 94 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 95 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 96 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 97 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 98 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 99 | soc-audio soc-audio: scheduling resume work |
|---|
| 100 | PM: Finishing wakeup. |
|---|
| 101 | Restarting tasks ... done. |
|---|
| 102 | soc-audio soc-audio: starting resume work |
|---|
| 103 | soc-audio soc-audio: resume work completed |
|---|
| 104 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 105 | Syncing filesystems ... done. |
|---|
| 106 | PM: Preparing system for mem sleep |
|---|
| 107 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 108 | Freezing user space processes ... (elapsed 0.02 seconds) done. |
|---|
| 109 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 110 | PM: Entering mem sleep |
|---|
| 111 | Suspending console(s) |
|---|
| 112 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 113 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 114 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 115 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 116 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 117 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 118 | gta02_udc_command(2) |
|---|
| 119 | suspending dma channel 0 |
|---|
| 120 | suspending dma channel 1 |
|---|
| 121 | suspending dma channel 2 |
|---|
| 122 | suspending dma channel 3 |
|---|
| 123 | GSTATUS3 0x3036c0dc |
|---|
| 124 | GSTATUS4 0x00000200 |
|---|
| 125 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 126 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 127 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 128 | gta02_udc_command(1) |
|---|
| 129 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 130 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 131 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 132 | timer_usec_ticks = 7864 |
|---|
| 133 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 134 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 135 | SD power -> 3200mV |
|---|
| 136 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 137 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 138 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 139 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 140 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 141 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 142 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 143 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 144 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 145 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 146 | soc-audio soc-audio: scheduling resume work |
|---|
| 147 | PM: Finishing wakeup. |
|---|
| 148 | Restarting tasks ... <6>soc-audio soc-audio: starting resume work |
|---|
| 149 | done. |
|---|
| 150 | soc-audio soc-audio: resume work completed |
|---|
| 151 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 152 | jbt6k74 spi2.0: **** jbt6k74 hsync suspend |
|---|
| 153 | jbt6k74 spi2.0: **** jbt6k74 powerdown |
|---|
| 154 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 155 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 156 | jbt6k74 spi2.0: **** jbt6k74 hsync suspend |
|---|
| 157 | jbt6k74 spi2.0: **** jbt6k74 powerdown |
|---|
| 158 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 159 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 160 | Syncing filesystems ... done. |
|---|
| 161 | PM: Preparing system for mem sleep |
|---|
| 162 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 163 | Freezing user space processes ... (elapsed 0.10 seconds) done. |
|---|
| 164 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 165 | PM: Entering mem sleep |
|---|
| 166 | Suspending console(s) |
|---|
| 167 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 168 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 169 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 170 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 171 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 172 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 173 | gta02_udc_command(2) |
|---|
| 174 | suspending dma channel 0 |
|---|
| 175 | suspending dma channel 1 |
|---|
| 176 | suspending dma channel 2 |
|---|
| 177 | suspending dma channel 3 |
|---|
| 178 | GSTATUS3 0x3036c0dc |
|---|
| 179 | GSTATUS4 0x00000200 |
|---|
| 180 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 181 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 182 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 183 | gta02_udc_command(1) |
|---|
| 184 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 185 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 186 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 187 | timer_usec_ticks = 7864 |
|---|
| 188 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 189 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 190 | SD power -> 3200mV |
|---|
| 191 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 192 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 193 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 194 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 195 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 196 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 197 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 198 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 199 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 200 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 201 | soc-audio soc-audio: scheduling resume work |
|---|
| 202 | PM: Finishing wakeup. |
|---|
| 203 | Restarting tasks ... <6>soc-audio soc-audio: starting resume work |
|---|
| 204 | done. |
|---|
| 205 | soc-audio soc-audio: resume work completed |
|---|
| 206 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 207 | Syncing filesystems ... done. |
|---|
| 208 | PM: Preparing system for mem sleep |
|---|
| 209 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 210 | Freezing user space processes ... (elapsed 0.07 seconds) done. |
|---|
| 211 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 212 | PM: Entering mem sleep |
|---|
| 213 | Suspending console(s) |
|---|
| 214 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 215 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 216 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 217 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 218 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 219 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 220 | gta02_udc_command(2) |
|---|
| 221 | suspending dma channel 0 |
|---|
| 222 | suspending dma channel 1 |
|---|
| 223 | suspending dma channel 2 |
|---|
| 224 | suspending dma channel 3 |
|---|
| 225 | GSTATUS3 0x3036c0dc |
|---|
| 226 | GSTATUS4 0x00000200 |
|---|
| 227 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 228 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 229 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 230 | gta02_udc_command(1) |
|---|
| 231 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 232 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 233 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 234 | timer_usec_ticks = 7864 |
|---|
| 235 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 236 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 237 | SD power -> 3200mV |
|---|
| 238 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 239 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 240 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 241 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 242 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 243 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 244 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 245 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 246 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 247 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 248 | soc-audio soc-audio: scheduling resume work |
|---|
| 249 | PM: Finishing wakeup. |
|---|
| 250 | Restarting tasks ... <6>soc-audio soc-audio: starting resume work |
|---|
| 251 | done. |
|---|
| 252 | soc-audio soc-audio: resume work completed |
|---|
| 253 | jbt6k74 spi2.0: **** jbt6k74 vsync suspend |
|---|
| 254 | Syncing filesystems ... done. |
|---|
| 255 | PM: Preparing system for mem sleep |
|---|
| 256 | jbt6k74 spi2.0: **** jbt6k74 unblank |
|---|
| 257 | Freezing user space processes ... (elapsed 0.08 seconds) done. |
|---|
| 258 | Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. |
|---|
| 259 | PM: Entering mem sleep |
|---|
| 260 | Suspending console(s) |
|---|
| 261 | pcf50633 0-0073: pcf50633_suspend |
|---|
| 262 | jbt6k74 spi2.0: **** jbt6k74 suspend start |
|---|
| 263 | jbt6k74 spi2.0: **** jbt6k74 suspend end |
|---|
| 264 | glamo-mci glamo-mci.0: faking cmd 7 during suspend |
|---|
| 265 | mmc_set_power(power_mode=0, vdd=0 |
|---|
| 266 | glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
|---|
| 267 | gta02_udc_command(2) |
|---|
| 268 | suspending dma channel 0 |
|---|
| 269 | suspending dma channel 1 |
|---|
| 270 | suspending dma channel 2 |
|---|
| 271 | suspending dma channel 3 |
|---|
| 272 | GSTATUS3 0x3036c0dc |
|---|
| 273 | GSTATUS4 0x00000200 |
|---|
| 274 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 275 | s3c2440-i2c s3c2440-i2c: slave address 0x10 |
|---|
| 276 | s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
|---|
| 277 | gta02_udc_command(1) |
|---|
| 278 | s3c2440-nand s3c2440-nand: Tacls=0, 0ns Twrph0=3 30ns, Twrph1=2 20ns |
|---|
| 279 | not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) |
|---|
| 280 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 281 | timer_usec_ticks = 7864 |
|---|
| 282 | timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8 |
|---|
| 283 | mmc_set_power(power_mode=1, vdd=20 |
|---|
| 284 | SD power -> 3200mV |
|---|
| 285 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 |
|---|
| 286 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 287 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 288 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 289 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 290 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 |
|---|
| 291 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0 |
|---|
| 292 | glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2 |
|---|
| 293 | jbt6k74 spi2.0: **** jbt6k74 resume start |
|---|
| 294 | jbt6k74 spi2.0: **** jbt6k74 resume end |
|---|
| 295 | soc-audio soc-audio: scheduling resume work |
|---|
| 296 | PM: Finishing wakeup. |
|---|
| 297 | Restarting tasks ... <6>usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 298 | done. |
|---|
| 299 | pcf50633 0-0073: pcf irq work already queued |
|---|
| 300 | soc-audio soc-audio: starting resume work |
|---|
| 301 | soc-audio soc-audio: resume work completed |
|---|
| 302 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 303 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 304 | eth0: no IPv6 routers present |
|---|
| 305 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 306 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 307 | power_supply bat: driver failed to report `current_now' property |
|---|
| 308 | power_supply bat: driver failed to report `time_to_full_now' property |
|---|
| 309 | power_supply bat: driver failed to report `charge_full' property |
|---|
| 310 | power_supply bat: driver failed to report `capacity' property |
|---|
| 311 | power_supply bat: driver failed to report `capacity' property |
|---|
| 312 | power_supply bat: driver failed to report `current_now' property |
|---|
| 313 | power_supply bat: driver failed to report `time_to_full_now' property |
|---|
| 314 | power_supply bat: driver failed to report `time_to_empty_now' property |
|---|
| 315 | power_supply bat: driver failed to report `current_now' property |
|---|
| 316 | power_supply bat: driver failed to report `charge_full' property |
|---|
| 317 | power_supply bat: driver failed to report `capacity' property |
|---|
| 318 | power_supply bat: driver failed to report `voltage_now' property |
|---|
| 319 | power_supply bat: driver failed to report `time_to_empty_now' property |
|---|
| 320 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 321 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 322 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
| 323 | usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS |
|---|
