Ticket #2328: syslog_and_devices.txt

File syslog_and_devices.txt, 27.2 KB (added by md2k7, 9 years ago)

dmesg output, and cat /proc/bus/input/devices

Line 
1root@om-gta02 ~ # dmesg
2[    0.000000] Linux version 2.6.34 (shr@opmbuild) (gcc version 4.4.4 (GCC) ) #1 PREEMPT Thu May 27 15:14:54 CEST 2010
3[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
4[    0.000000] CPU: VIVT data cache, VIVT instruction cache
5[    0.000000] Machine: GTA02
6[    0.000000] Memory policy: ECC disabled, Data cache writeback
7[    0.000000] On node 0 totalpages: 32768
8[    0.000000] free_area_init_node: node 0, pgdat c04ac9a4, node_mem_map c0501000
9[    0.000000]   Normal zone: 256 pages used for memmap
10[    0.000000]   Normal zone: 0 pages reserved
11[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
12[    0.000000] CPU S3C2442B (id 0x32440aab)
13[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
14[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
15[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
16[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
17[    0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro  mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs)  g_ether.host_addr=00:1F:11:01:43:B4 g_ether.dev_addr=00:1F:11:01:43:B4  root=/dev/mmcblk0p1 rootdelay=1 loglevel=1 quiet splash rootwait=7
18[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
19[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
20[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
21[    0.000000] Memory: 128MB = 128MB total
22[    0.000000] Memory: 124828k/124828k available, 6244k reserved, 0K highmem
23[    0.000000] Virtual kernel memory layout:
24[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
25[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
26[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
27[    0.000000]     vmalloc : 0xc8800000 - 0xe0000000   ( 376 MB)
28[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
29[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
30[    0.000000]       .init : 0xc0008000 - 0xc0028000   ( 128 kB)
31[    0.000000]       .text : 0xc0028000 - 0xc047f000   (4444 kB)
32[    0.000000]       .data : 0xc0480000 - 0xc04acfc0   ( 180 kB)
33[    0.000000] Hierarchical RCU implementation.
34[    0.000000] NR_IRQS:134
35[    0.000000] irq: clearing pending ext status 000b12f0
36[    0.000000] irq: clearing pending ext status 000900d0
37[    0.000000] irq: clearing subpending status 00000180
38[    0.000000] irq: clearing subpending status 00000080
39[    0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
40[    0.000000] Console: colour dummy device 80x30
41[    0.000000] console [tty0] enabled
42[    0.000000] console [ttySAC2] enabled
43[    0.000000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
44[    0.095000] Mount-cache hash table entries: 512
45[    0.095000] CPU: Testing write buffer coherency: ok
46[    0.095000] devtmpfs: initialized
47[    0.100000] regulator: core version 0.5
48[    0.100000] NET: Registered protocol family 16
49[    0.100000] S3C Power Management, Copyright 2004 Simtec Electronics
50[    0.110000] S3C2442: Initialising architecture
51[    0.110000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
52[    0.110000] DMA channel 0 at c8808000, irq 33
53[    0.110000] DMA channel 1 at c8808040, irq 34
54[    0.110000] DMA channel 2 at c8808080, irq 35
55[    0.110000] DMA channel 3 at c88080c0, irq 36
56[    0.110000] S3C244X: Clock Support, DVS off
57[    0.110000] s3c-adc s3c24xx-adc: attached adc driver
58[    0.110000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0
59[    0.110000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8
60[    0.110000] s3c24xx-pwm s3c24xx-pwm.2: tin at 8333333, tdiv at 8333333, tin=divclk, base 12
61[    0.110000] s3c24xx-pwm s3c24xx-pwm.3: tin at 8333333, tdiv at 8333333, tin=divclk, base 16
62[    0.125000] bio: create slab <bio-0> at 0
63[    0.125000] usbcore: registered new interface driver usbfs
64[    0.125000] usbcore: registered new interface driver hub
65[    0.125000] usbcore: registered new device driver usb
66[    0.125000] s3c-i2c s3c2440-i2c: slave address 0x10
67[    0.125000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz
68[    0.150000] pcf50633 0-0073: Probed device version 19 variant 132
69[    0.200000] wake enabled for irq 53
70[    0.230000] regulator: auto: 3300 mV normal
71[    0.260000] regulator: down1: 1300 <--> 1600 mV at 1300 mV normal
72[    0.290000] regulator: down2: 1800 mV normal
73[    0.300000] regulator: ldo1: 3300 mV normal
74[    0.310000] regulator: ldo2: 3300 mV normal
75[    0.320000] regulator: ldo3: 3000 mV normal
76[    0.330000] regulator: ldo4: 3200 mV normal
77[    0.340000] regulator: ldo5: 3000 mV normal
78[    0.340000] regulator: ldo6: 3000 mV normal
79[    0.350000] regulator: hcldo: 2000 <--> 3300 mV at 3000 mV normal
80[    0.350000] regulator: memldo: 1800 mV normal
81[    0.350000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
82[    0.350000] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
83[    0.355000] Bluetooth: Core ver 2.15
84[    0.355000] NET: Registered protocol family 31
85[    0.355000] Bluetooth: HCI device and connection manager initialized
86[    0.355000] Bluetooth: HCI socket layer initialized
87[    0.360000] NET: Registered protocol family 2
88[    0.360000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
89[    0.360000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
90[    0.360000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
91[    0.360000] TCP: Hash tables configured (established 4096 bind 4096)
92[    0.360000] TCP reno registered
93[    0.360000] UDP hash table entries: 256 (order: 0, 4096 bytes)
94[    0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
95[    0.360000] NET: Registered protocol family 1
96[    0.360000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting
97[    0.385000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1
98[    0.425000] gta02-pm-gps gta02-pm-gps.0: starting
99[    0.425000] gta02-pm-wlan gta02-pm-wlan.0: starting
100[    0.630000] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
101[    0.630000] msgmni has been set to 243
102[    0.645000] alg: No test for stdrng (krng)
103[    0.645000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
104[    0.650000] io scheduler noop registered
105[    0.650000] io scheduler deadline registered (default)
106[    0.710000] regulator: GSM: 3700 mV normal
107[    0.750000] regulator: USBHOST: 3700 mV normal
108[    0.805000] [drm] Initialized drm 1.1.0 20060810
109[    0.805000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
110[    0.810000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
111[    0.810000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
112[    0.830000] brd: module loaded
113[    0.870000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
114[    0.870000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
115[    0.870000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
116[    0.870000] [glamo-drm] SMedia Glamo Direct Rendering Support
117[    0.870000] [glamo-drm] 8318976 bytes of VRAM
118[    0.990000] [glamo-drm] Allocated 480x640 fb: bo c7f42ae0
119[    0.990000] Setting mode!
120[    1.095000] Setting base!
121[    1.255000] Console: switching to colour frame buffer device 60x40
122[    1.320000] [glamo-drm] fb0: glamodrmfb frame buffer device
123[    1.320000] [glamo-drm] Registered panic notifier
124[    1.320000] [drm] Initialized glamo-drm 0.1.0 20090614 on minor 0
125[    1.320000] physmap platform flash device: 00200000 at 18000000
126[    1.325000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
127[    1.325000]  Intel/Sharp Extended Query Table at 0x0039
128[    1.325000]  Intel/Sharp Extended Query Table at 0x0039
129[    1.325000]  Intel/Sharp Extended Query Table at 0x0039
130[    1.325000]  Intel/Sharp Extended Query Table at 0x0039
131[    1.325000]  Intel/Sharp Extended Query Table at 0x0039
132[    1.325000] cfi_cmdset_0001: Erase suspend on write enabled
133[    1.325000] erase region 0: offset=0x0,size=0x2000,blocks=8
134[    1.325000] erase region 1: offset=0x10000,size=0x10000,blocks=31
135[    1.325000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
136[    1.325000] RedBoot partition parsing not available
137[    1.325000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
138[    1.330000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
139[    1.330000] s3c24xx-nand s3c2440-nand: NAND soft ECC
140[    1.330000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
141[    1.330000] 6 cmdlinepart partitions found on MTD device neo1973-nand
142[    1.330000] Creating 6 MTD partitions on "neo1973-nand":
143[    1.330000] 0x000000000000-0x000000040000 : "qi"
144[    1.330000] 0x000000040000-0x000000080000 : "depr-ub-env"
145[    1.330000] 0x000000080000-0x000000880000 : "kernel"
146[    1.335000] 0x000000880000-0x000000920000 : "depr"
147[    1.340000] 0x000000920000-0x000000960000 : "identity-ext2"
148[    1.340000] 0x000000960000-0x000010000000 : "rootfs"
149[    1.440000] entering (old_state=off, new_state=normal)
150[    1.505000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0
151[    1.525000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
152[    1.660000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
153[    1.665000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
154[    1.730000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
155[    1.735000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
156[    1.745000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
157[    1.755000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
158[    1.755000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
159[    1.755000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
160[    1.755000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
161[    1.765000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
162[    1.775000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0
163[    1.780000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2
164[    1.780000] mmc0: new SD card at address b6d4
165[    1.810000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
166[    1.810000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
167[    1.810000] usb usb1: Product: S3C24XX OHCI
168[    1.810000] usb usb1: Manufacturer: Linux 2.6.34 ohci_hcd
169[    1.810000] usb usb1: SerialNumber: s3c24xx
170[    1.815000] hub 1-0:1.0: USB hub found
171[    1.815000] hub 1-0:1.0: 2 ports detected
172[    1.825000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
173[    1.825000] mice: PS/2 mouse device common for all mice
174[    1.830000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
175[    1.830000] s3c24xx-ts s3c2440-ts: driver attached, registering input device
176[    1.830000] input: S3C24XX TouchScreen as /devices/virtual/input/input1
177[    1.835000] input: PCF50633 PMU events as /devices/virtual/input/input2
178[    1.865000] input: lis302-1 (top) as /devices/virtual/input/input3
179[    1.870000] lis302dl spi3.0: Found lis302-1 (top)
180[    1.870000] input: lis302-2 (bottom) as /devices/virtual/input/input4
181[    1.875000] lis302dl spi3.1: Found lis302-2 (bottom)
182[    1.880000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0
183[    1.880000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
184[    1.880000] i2c /dev entries driver
185[    1.890000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
186[    1.890000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
187[    1.890000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
188[    1.890000] SoftDog: cannot register miscdev on minor=130 (err=-16)
189[    1.895000] Bluetooth: Generic Bluetooth USB driver ver 0.6
190[    1.895000] usbcore: registered new interface driver btusb
191[    1.895000] cpuidle: using governor ladder
192[    1.895000] mmcblk0: mmc0:b6d4 SU02G 1.84 GiB
193[    1.895000]  mmcblk0: p1 p2
194[    2.305000] s3c-sdi s3c2440-sdi: powered down.
195[    2.305000] s3c-sdi s3c2440-sdi: mmc1 - using pio, sw SDIO IRQ
196[    2.310000] HIFInit
197[    2.310000] Registered led device: gta02:red:aux
198[    2.310000] Registered led device: gta02:orange:power
199[    2.310000] Registered led device: gta02:blue:power
200[    2.310000] Registered led device: gta02::vibrator
201[    2.315000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
202[    2.315000] usbcore: registered new interface driver usbhid
203[    2.315000] usbhid: USB HID core driver
204[    2.330000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
205[    2.345000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
206[    2.345000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
207[    2.345000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
208[    2.365000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
209[    2.365000] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
210[    2.375000] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
211[    2.380000] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
212[    2.380000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
213[    2.380000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
214[    2.380000] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
215[    2.380000] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
216[    2.380000] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
217[    2.380000] mmc1: new SDIO card at address 0001
218[    2.480000] No device for DAI s3c24xx-i2s
219[    2.480000] No device for DAI Bluetooth
220[    2.480000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
221[    2.480000] asoc: WM8753 Voice <-> Bluetooth mapping ok
222[    2.510000] ALSA device list:
223[    2.510000]   #0: neo1973gta02 (WM8753)
224[    2.510000] TCP westwood registered
225[    2.510000] NET: Registered protocol family 17
226[    2.510000] Bridge firewalling registered
227[    2.510000] Bluetooth: L2CAP ver 2.14
228[    2.510000] Bluetooth: L2CAP socket layer initialized
229[    2.510000] Bluetooth: SCO (Voice Link) ver 0.6
230[    2.510000] Bluetooth: SCO socket layer initialized
231[    2.510000] Bluetooth: RFCOMM TTY layer initialized
232[    2.510000] Bluetooth: RFCOMM socket layer initialized
233[    2.510000] Bluetooth: RFCOMM ver 1.11
234[    2.510000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
235[    2.510000] Bluetooth: BNEP filters: protocol multicast
236[    2.510000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
237[    2.525000] regulator_init_complete: incomplete constraints, leaving memldo on
238[    2.530000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
239[    2.575000] pcf50633-rtc pcf50633-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
240[    2.575000] Waiting 1sec before mounting root device...
241[    2.720000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
242[    2.720000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
243[    3.590000] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
244[    3.590000] VFS: Mounted root (ext3 filesystem) readonly on device 179:1.
245[    3.590000] kjournald starting.  Commit interval 5 seconds
246[    3.595000] devtmpfs: mounted
247[    3.595000] Freeing init memory: 128K
248[    4.850000] EXT3-fs (mmcblk0p1): using internal journal
249[    4.985000] pcf50633 0-0073: usb curlim to 1000 mA
250[    7.340000] udev: starting version 151
251[   17.780000] usb0: MAC 00:1f:11:01:43:b4
252[   17.780000] usb0: HOST MAC 00:1f:11:01:43:b5
253[   17.780000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
254[   17.780000] g_ether gadget: g_ether ready
255[   18.190000] PPP generic driver version 2.4.2
256[   18.405000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
257[   21.425000] pcf50633 0-0073: usb curlim to 500 mA
258[   24.170000] Setting base!
259[   31.750000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 0
260[   31.775000] usb 1-1: USB disconnect, address 2
261[   54.195000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
262[   55.190000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
263[   58.185000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
264[   59.445000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
265[   80.885000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
266[  101.470000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
267[  102.745000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
268[  105.990000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
269[  109.065000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
270[  111.445000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
271[  111.450000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
272[  112.335000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
273[  113.755000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
274[  114.765000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
275[  115.620000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
276[  115.990000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
277[  116.245000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
278[  116.495000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
279[  116.720000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
280[  116.955000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
281[  117.635000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
282[  117.850000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
283[  118.065000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
284[  118.290000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
285[  118.555000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
286[  119.075000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
287[  119.325000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
288[  143.890000] pcf50633 0-0073: usb curlim to 0 mA
289[  146.845000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
290[  149.285000] pcf50633 0-0073: usb curlim to 500 mA
291[  158.105000] Power off sequence
292[  158.105000] About to set power..
293[  158.105000] Setting JBT power.. 0
294[  158.105000] entering (old_state=normal, new_state=off)
295[  158.125000] entering (old_state=off, new_state=off)
296[  168.320000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
297[  168.330000] Power on sequence
298[  168.330000] About to set power..
299[  168.330000] Setting JBT power.. 2
300[  168.330000] entering (old_state=off, new_state=normal)
301[  168.540000] Setting previous mode
302[  168.540000] Setting mode!
303[  168.645000] Setting base!
304[  168.785000] entering (old_state=normal, new_state=normal)
305[  170.090000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
306[  172.650000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
307[  174.885000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
308[  175.705000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
309[  176.595000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
310[  177.330000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
311[  177.530000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
312[  178.365000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
313[  179.920000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
314[  199.360000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
315[  208.615000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
316[  209.720000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
317[  210.240000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
318[  210.245000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
319[  215.815000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
320[  216.680000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
321[  219.330000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
322[  219.905000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
323[  220.860000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
324[  221.330000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
325[  222.755000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
326[  223.460000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
327[  224.490000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
328[  225.225000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
329[  225.990000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
330[  226.495000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
331[  227.735000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
332[  228.475000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
333[  229.160000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
334[  229.910000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
335[  230.775000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
336[  232.380000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
337[  233.280000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
338[  235.335000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
339[  239.920000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
340[  240.915000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
341[  241.625000] s3c24xx-ts s3c2440-ts: stylus_irq: count=0
342[  242.535000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
343[  242.535000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
344[  243.325000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
345[  245.715000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
346[  246.395000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
347[  246.945000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
348[  247.615000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
349[  248.370000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
350[  249.020000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
351[  249.735000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
352[  250.615000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
353[  251.620000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
354[  252.470000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
355[  253.735000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
356[  254.585000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
357[  254.855000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
358[  255.545000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
359[  256.145000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
360[  256.730000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
361[  257.665000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
362[  258.375000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
363[  259.550000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
364[  260.250000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
365[  260.995000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
366[  261.985000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
367[  262.740000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
368[  263.555000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
369[  264.155000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
370[  272.390000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
371[  272.860000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
372[  273.775000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
373[  274.325000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
374[  281.170000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
375[  282.270000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
376[  283.155000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
377[  284.190000] pcf50633 0-0073: usb curlim to 500 mA
378[  286.145000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
379[  290.375000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
380[  290.855000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
381[  291.345000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
382[  291.775000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
383[  292.840000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
384[  293.010000] s3c24xx-ts s3c2440-ts: stylus_irq: count=4
385[  303.140000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
386[  303.610000] pcf50633 0-0073: usb curlim to 0 mA
387[  305.640000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
388[  307.505000] pcf50633 0-0073: usb curlim to 500 mA
389[  308.135000] keyboard.c: can't emulate rawmode for keycode 169
390[  308.395000] keyboard.c: can't emulate rawmode for keycode 169
391[  309.555000] keyboard.c: can't emulate rawmode for keycode 169
392[  309.755000] keyboard.c: can't emulate rawmode for keycode 169
393[  339.110000] Power off sequence
394[  339.110000] About to set power..
395[  339.110000] Setting JBT power.. 0
396[  339.110000] entering (old_state=normal, new_state=off)
397[  339.130000] entering (old_state=off, new_state=off)
398[  359.550000] keyboard.c: can't emulate rawmode for keycode 169
399[  359.595000] Power on sequence
400[  359.595000] About to set power..
401[  359.595000] Setting JBT power.. 2
402[  359.610000] entering (old_state=off, new_state=normal)
403[  359.790000] keyboard.c: can't emulate rawmode for keycode 169
404[  359.825000] Setting previous mode
405[  359.825000] Setting mode!
406[  359.930000] Setting base!
407[  360.070000] entering (old_state=normal, new_state=normal)
408[  361.380000] keyboard.c: can't emulate rawmode for keycode 169
409[  361.605000] keyboard.c: can't emulate rawmode for keycode 169
410[  362.170000] keyboard.c: can't emulate rawmode for keycode 169
411[  362.375000] keyboard.c: can't emulate rawmode for keycode 169
412[  392.110000] Power off sequence
413[  392.110000] About to set power..
414[  392.110000] Setting JBT power.. 0
415[  392.110000] entering (old_state=normal, new_state=off)
416[  392.130000] entering (old_state=off, new_state=off)
417[  447.880000] keyboard.c: can't emulate rawmode for keycode 169
418[  447.910000] Power on sequence
419[  447.910000] About to set power..
420[  447.910000] Setting JBT power.. 2
421[  447.910000] entering (old_state=off, new_state=normal)
422[  448.110000] keyboard.c: can't emulate rawmode for keycode 169
423[  448.130000] Setting previous mode
424[  448.130000] Setting mode!
425[  448.235000] Setting base!
426[  448.375000] entering (old_state=normal, new_state=normal)
427[  478.110000] Power off sequence
428[  478.110000] About to set power..
429[  478.110000] Setting JBT power.. 0
430[  478.110000] entering (old_state=normal, new_state=off)
431[  478.130000] entering (old_state=off, new_state=off)
432[  482.305000] keyboard.c: can't emulate rawmode for keycode 169
433[  482.340000] Power on sequence
434[  482.340000] About to set power..
435[  482.340000] Setting JBT power.. 2
436[  482.340000] entering (old_state=off, new_state=normal)
437[  482.545000] keyboard.c: can't emulate rawmode for keycode 169
438[  482.550000] Setting previous mode
439[  482.550000] Setting mode!
440[  482.655000] Setting base!
441[  482.795000] entering (old_state=normal, new_state=normal)
442[  512.105000] Power off sequence
443[  512.105000] About to set power..
444[  512.105000] Setting JBT power.. 0
445[  512.105000] entering (old_state=normal, new_state=off)
446[  512.125000] entering (old_state=off, new_state=off)
447[  537.740000] keyboard.c: can't emulate rawmode for keycode 169
448[  537.770000] Power on sequence
449[  537.770000] About to set power..
450[  537.770000] Setting JBT power.. 2
451[  537.770000] entering (old_state=off, new_state=normal)
452
453root@om-gta02 ~ # cat /proc/bus/input/devices
454I: Bus=0019 Vendor=0001 Product=0001 Version=0100
455N: Name="gpio-keys"
456P: Phys=gpio-keys/input0
457S: Sysfs=/devices/platform/gpio-keys/input/input0
458U: Uniq=
459H: Handlers=kbd event0
460B: EV=3
461B: KEY=200 0 800000 0 0 0
462
463I: Bus=0019 Vendor=dead Product=beef Version=0102
464N: Name="S3C24XX TouchScreen"
465P: Phys=
466S: Sysfs=/devices/virtual/input/input1
467U: Uniq=
468H: Handlers=mouse0 event1
469B: EV=b
470B: KEY=400 0 0 0 0 0 0 0 0 0 0
471B: ABS=3
472
473I: Bus=0018 Vendor=0000 Product=0000 Version=0000
474N: Name="PCF50633 PMU events"
475P: Phys=
476S: Sysfs=/devices/virtual/input/input2
477U: Uniq=
478H: Handlers=kbd event2
479B: EV=400003
480B: KEY=100000 0 0 0
481
482I: Bus=0018 Vendor=0000 Product=0000 Version=0000
483N: Name="lis302-1 (top)"
484P: Phys=
485S: Sysfs=/devices/virtual/input/input3
486U: Uniq=
487H: Handlers=event3
488B: EV=9
489B: ABS=7
490
491I: Bus=0018 Vendor=0000 Product=0000 Version=0000
492N: Name="lis302-2 (bottom)"
493P: Phys=
494S: Sysfs=/devices/virtual/input/input4
495U: Uniq=
496H: Handlers=event4
497B: EV=9
498B: ABS=7