Ticket #2344: a

File a, 21.2 KB (added by lindi, 9 years ago)

dmesg gta02_drm_defconfig and a9254be10ac2294e

Line 
1[    0.000000] Linux version 2.6.32om-gta02-2.6.32-a9254be10ac2294e (lindi@fomalhaut) (gcc version 4.2.4 (Debian 4.2.4-6)) #1 PREEMPT Wed Jul 7 11:30:46 EEST 2010
2[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
3[    0.000000] CPU: VIVT data cache, VIVT instruction cache
4[    0.000000] Machine: GTA02
5[    0.000000] Memory policy: ECC disabled, Data cache writeback
6[    0.000000] On node 0 totalpages: 32512
7[    0.000000] free_area_init_node: node 0, pgdat c0497444, node_mem_map c04ee000
8[    0.000000]   Normal zone: 254 pages used for memmap
9[    0.000000]   Normal zone: 0 pages reserved
10[    0.000000]   Normal zone: 32258 pages, LIFO batch:7
11[    0.000000] CPU S3C2442B (id 0x32440aab)
12[    0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
13[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
14[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
15[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32258
16[    0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro  mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs)  g_ether.host_addr=00:1F:11:01:1F:6B g_ether.dev_addr=00:1F:11:01:1F:6B  root=/dev/mmcblk0p1 rootdelay=1 rootdelay=1 panic=20 mem=127M root=/dev/mmcblk0p2 loglevel=8
17[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
18[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
19[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
20[    0.000000] Memory: 127MB = 127MB total
21[    0.000000] Memory: 123732KB available (4364K code, 497K data, 144K init, 0K highmem)
22[    0.000000] Hierarchical RCU implementation.
23[    0.000000] NR_IRQS:94
24[    0.000000] irq: clearing pending ext status 000b12f0
25[    0.000000] irq: clearing pending ext status 000802d0
26[    0.000000] irq: clearing subpending status 00000180
27[    0.000000] irq: clearing subpending status 00000080
28[    0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
29[    0.000000] Console: colour dummy device 80x30
30[    0.000000] console [tty0] enabled
31[    0.000000] console [ttySAC2] enabled
32[    0.005000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
33[    0.105000] Mount-cache hash table entries: 512
34[    0.105000] CPU: Testing write buffer coherency: ok
35[    0.110000] devtmpfs: initialized
36[    0.115000] regulator: core version 0.5
37[    0.115000] NET: Registered protocol family 16
38[    0.125000] S3C Power Management, Copyright 2004 Simtec Electronics
39[    0.130000] s3c24xx-adc s3c24xx-adc: attached adc driver
40[    0.135000] S3C2442: Initialising architecture
41[    0.135000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
42[    0.140000] DMA channel 0 at c8008000, irq 33
43[    0.140000] DMA channel 1 at c8008040, irq 34
44[    0.145000] DMA channel 2 at c8008080, irq 35
45[    0.150000] DMA channel 3 at c80080c0, irq 36
46[    0.155000] S3C244X: Clock Support, DVS off
47[    0.160000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0
48[    0.165000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8
49[    0.170000] s3c24xx-pwm s3c24xx-pwm.3: tin at 8333333, tdiv at 8333333, tin=divclk, base 16
50[    0.190000] bio: create slab <bio-0> at 0
51[    0.195000] usbcore: registered new interface driver usbfs
52[    0.195000] usbcore: registered new interface driver hub
53[    0.200000] usbcore: registered new device driver usb
54[    0.205000] s3c-i2c s3c2440-i2c: slave address 0x10
55[    0.210000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz
56[    0.235000] pcf50633 0-0073: Probed device version 19 variant 132
57[    0.315000] regulator: auto: 3300 mV normal
58[    0.335000] regulator: down1: 1300 <--> 1600 mV normal
59[    0.365000] regulator: down2: 1800 mV normal
60[    0.375000] regulator: ldo1: 3300 mV normal
61[    0.385000] regulator: ldo2: 3300 mV normal
62[    0.395000] regulator: ldo3: 3000 mV normal
63[    0.405000] regulator: ldo4: 3200 mV normal
64[    0.415000] regulator: ldo5: 3000 mV normal
65[    0.415000] regulator: ldo6: 3000 mV normal
66[    0.415000] regulator: hcldo: 2000 <--> 3300 mV normal
67[    0.420000] regulator: memldo: 1800 mV normal
68[    0.425000] wake enabled for irq 53
69[    0.430000] s3c24xx-pwm s3c24xx-pwm.2: tin at 8333333, tdiv at 8333333, tin=divclk, base 12
70[    0.440000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
71[    0.445000] Bluetooth: Core ver 2.15
72[    0.445000] NET: Registered protocol family 31
73[    0.450000] Bluetooth: HCI device and connection manager initialized
74[    0.455000] Bluetooth: HCI socket layer initialized
75[    0.465000] NET: Registered protocol family 2
76[    0.465000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
77[    0.475000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
78[    0.480000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
79[    0.485000] TCP: Hash tables configured (established 4096 bind 4096)
80[    0.490000] TCP reno registered
81[    0.495000] NET: Registered protocol family 1
82[    0.500000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting
83[    0.525000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1
84[    0.565000] gta02-pm-gps gta02-pm-gps.0: starting
85[    0.565000] gta02-pm-wlan gta02-pm-wlan.0: starting
86[    0.770000] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
87[    0.775000] msgmni has been set to 241
88[    0.790000] alg: No test for stdrng (krng)
89[    0.795000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
90[    0.800000] io scheduler noop registered
91[    0.800000] io scheduler deadline registered (default)
92[    0.870000] regulator: GSM: 3700 mV normal
93[    0.930000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
94[    0.930000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
95[    0.935000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
96[    0.965000] brd: module loaded
97[    1.005000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
98[    1.005000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
99[    1.015000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
100[    1.020000] ENABLE
101[    1.020000] physmap platform flash device: 00200000 at 18000000
102[    1.025000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
103[    1.030000]  Intel/Sharp Extended Query Table at 0x0039
104[    1.035000]  Intel/Sharp Extended Query Table at 0x0039
105[    1.040000]  Intel/Sharp Extended Query Table at 0x0039
106[    1.045000]  Intel/Sharp Extended Query Table at 0x0039
107[    1.050000]  Intel/Sharp Extended Query Table at 0x0039
108[    1.055000] cfi_cmdset_0001: Erase suspend on write enabled
109[    1.060000] erase region 0: offset=0x0,size=0x2000,blocks=8
110[    1.065000] erase region 1: offset=0x10000,size=0x10000,blocks=31
111[    1.070000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
112[    1.075000] RedBoot partition parsing not available
113[    1.080000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
114[    1.085000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
115[    1.090000] s3c24xx-nand s3c2440-nand: NAND soft ECC
116[    1.095000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
117[    1.100000] 6 cmdlinepart partitions found on MTD device neo1973-nand
118[    1.105000] Creating 6 MTD partitions on "neo1973-nand":
119[    1.110000] 0x000000000000-0x000000040000 : "qi"
120[    1.120000] 0x000000040000-0x000000080000 : "depr-ub-env"
121[    1.125000] 0x000000080000-0x000000880000 : "kernel"
122[    1.130000] 0x000000880000-0x000000920000 : "depr"
123[    1.135000] 0x000000920000-0x000000960000 : "identity-ext2"
124[    1.140000] 0x000000960000-0x000010000000 : "rootfs"
125[    1.275000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0
126[    1.295000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
127[    1.320000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
128[    1.330000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
129[    1.345000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
130[    1.345000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
131[    1.350000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
132[    1.355000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
133[    1.395000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
134[    1.400000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
135[    1.410000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
136[    1.420000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
137[    1.425000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
138[    1.430000] usb usb1: Product: S3C24XX OHCI
139[    1.435000] usb usb1: Manufacturer: Linux 2.6.32om-gta02-2.6.32-a9254be10ac2294e ohci_hcd
140[    1.440000] usb usb1: SerialNumber: s3c24xx
141[    1.445000] usb usb1: configuration #1 chosen from 1 choice
142[    1.450000] hub 1-0:1.0: USB hub found
143[    1.455000] hub 1-0:1.0: 2 ports detected
144[    1.470000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
145[    1.475000] usb0: MAC 00:1f:11:01:1f:6b
146[    1.475000] usb0: HOST MAC 00:1f:11:01:1f:6b
147[    1.480000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
148[    1.485000] g_ether gadget: g_ether ready
149[    1.490000] mice: PS/2 mouse device common for all mice
150[    1.495000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
151[    1.500000] s3c2440-ts s3c2440-ts: Starting
152[    1.505000] s3c2440-ts s3c2440-ts: Created Group filter len:12 coords:2 close:10 thresh:6
153[    1.510000] s3c2440-ts s3c2440-ts: Created Median filter len:20 coords:2 dec_threshold:24
154[    1.515000] s3c2440-ts s3c2440-ts: Created Mean filter len:4 coords:2
155[    1.520000] s3c2440-ts s3c2440-ts: Created Linear filter coords:2
156[    1.525000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
157[    1.530000] s3c2440-ts s3c2440-ts: Successfully loaded
158[    1.540000] input: s3c2410 TouchScreen as /devices/virtual/input/input1
159[    1.545000] input: PCF50633 PMU events as /devices/virtual/input/input2
160[    1.575000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0
161[    1.575000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
162[    1.580000] i2c /dev entries driver
163[    1.590000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
164[    1.605000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc
165[    1.610000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
166[    1.615000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
167[    1.620000] SoftDog: cannot register miscdev on minor=130 (err=-16)
168[    1.625000] Bluetooth: Generic Bluetooth USB driver ver 0.6
169[    1.635000] usbcore: registered new interface driver btusb
170[    1.640000] cpuidle: using governor ladder
171[    1.645000] s3c-sdi s3c2440-sdi: powered down.
172[    1.645000] s3c-sdi s3c2440-sdi: mmc1 - using pio, sw SDIO IRQ
173[    1.650000] HIFInit
174[    1.655000] Registered led device: gta02:red:aux
175[    1.665000] wacom driver registered
176[    1.665000] usbcore: registered new interface driver usbhid
177[    1.670000] usbhid: v2.6:USB HID core driver
178[    1.675000] Advanced Linux Sound Architecture Driver Version 1.0.21.
179[    1.910000] No device for DAI s3c24xx-i2s
180[    1.910000] No device for DAI Bluetooth
181[    1.915000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
182[    1.915000] asoc: WM8753 Voice <-> Bluetooth mapping ok
183[    1.990000] ALSA device list:
184[    1.990000]   #0: neo1973gta02 (WM8753)
185[    1.990000] TCP westwood registered
186[    1.995000] NET: Registered protocol family 17
187[    2.000000] Bridge firewalling registered
188[    2.000000] Bluetooth: L2CAP ver 2.14
189[    2.005000] Bluetooth: L2CAP socket layer initialized
190[    2.010000] Bluetooth: SCO (Voice Link) ver 0.6
191[    2.015000] Bluetooth: SCO socket layer initialized
192[    2.020000] Bluetooth: RFCOMM TTY layer initialized
193[    2.025000] Bluetooth: RFCOMM socket layer initialized
194[    2.030000] Bluetooth: RFCOMM ver 1.11
195[    2.035000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
196[    2.040000] Bluetooth: BNEP filters: protocol multicast
197[    2.045000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
198[    2.065000] regulator_init_complete: incomplete constraints, leaving memldo on
199[    2.115000] pcf50633-rtc pcf50633-rtc: setting system clock to 2010-07-07 09:41:50 UTC (1278495710)
200[    2.145000] Waiting 1sec before mounting root device...
201[    2.200000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
202[    2.205000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0
203[    2.215000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2
204[    2.220000] mmc0: new high speed SDHC card at address 0001
205[    2.225000] mmcblk0: mmc0:0001 00000 3.79 GiB
206[    2.230000]  mmcblk0: p1 p2
207[    2.235000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
208[    2.250000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
209[    2.255000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
210[    2.270000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
211[    2.270000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
212[    2.275000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
213[    2.295000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
214[    2.300000] mmc1: queuing CIS tuple 0x01 length 3
215[    2.305000] mmc1: queuing CIS tuple 0x1a length 5
216[    2.310000] mmc1: queuing CIS tuple 0x1b length 8
217[    2.310000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
218[    2.315000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
219[    2.320000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
220[    2.330000] mmc1: queuing CIS tuple 0x80 length 1
221[    2.330000] mmc1: queuing CIS tuple 0x81 length 1
222[    2.335000] mmc1: queuing CIS tuple 0x82 length 1
223[    2.340000] mmc1: new SDIO card at address 0001
224[    2.565000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
225[    2.565000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
226[    2.570000] usb 1-1: configuration #1 chosen from 1 choice
227[    3.160000] EXT3-fs: mounted filesystem with writeback data mode.
228[    3.160000] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
229[    3.165000] kjournald starting.  Commit interval 5 seconds
230[    3.175000] devtmpfs: mounted
231[    3.175000] Freeing init memory: 144K
232[    4.625000] pcf50633 0-0073: usb curlim to 500 mA
233[    5.585000] udev: starting version 158
234[    7.135000] udev: renamed network interface usb0 to usb
235[   12.600000] EXT3 FS on mmcblk0p2, internal journal
236[   17.155000] Adding 65528k swap on /SWAP.  Priority:-1 extents:17 across:65596k SS
237[   44.135000] s3c2410-wdt s3c2410-wdt: Unexpected close, not stopping watchdog
238[  308.595000] PM: Syncing filesystems ... done.
239[  309.795000] Freezing user space processes ... (elapsed 0.00 seconds) done.
240[  309.800000] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
241[  309.800000] Suspending console(s) (use no_console_suspend to debug)
242[  309.865000] jbt6k74 spi2.0: suspended
243[  309.865000] DISABLE
244[  309.895000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
245[  309.905000] wake enabled for irq 17
246[  309.925000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 0
247[  309.955000] mmc1: card 0001 removed
248[  309.955000] s3c-sdi s3c2440-sdi: powered down.
249[  309.955000] s3c-sdi s3c2440-sdi: powered down.
250[  309.955000] suspending dma channel 0
251[  309.955000] suspending dma channel 1
252[  309.955000] suspending dma channel 2
253[  309.955000] suspending dma channel 3
254[  309.955000] saved f4000008 value 715fbd8d
255[  309.955000] saved f400001c value 0000f9ff
256[  309.955000] saved fb0000c4 value 00000000
257[  309.955000] saved fb0000c8 value 00000000
258[  309.955000] saved fb0000d4 value 00001176
259[  309.955000] saved fb0000d0 value 01551554
260[  309.955000] saved fb0000d8 value 00001f7e
261[  309.955000] s3c_pm_enter(3)
262[  309.955000] s3c_sleep_save_phys=0x3049836c
263[  309.955000] GPIOA: save 007e5fff,00000000,00000000,00000000
264[  309.955000] GPIOB: save 00155510,00000000,000007ff,00000000
265[  309.955000] GPIOC: save 55555155,0000a000,0000ffdf,00000000
266[  309.955000] GPIOD: save 45555555,00004019,0000ffff,00000000
267[  309.955000] GPIOE: save aaaaa6aa,0000ffdf,0000f7ff,00000000
268[  309.955000] GPIOF: save 0000aaaa,00000023,000000f7,00000000
269[  309.955000] GPIOG: save 01aafe79,000067f6,0000ffff,00000000
270[  309.955000] saved fb000084 value 00000000
271[  309.955000] saved f4100000 value 00ffffff
272[  309.955000] saved f410000c value 00013fc0
273[  309.955000] saved f4200000 value 2211d1d0
274[  309.955000] saved f4200004 value 00000700
275[  309.955000] saved f4200008 value 00001bc0
276[  309.955000] saved f420000c value 00000700
277[  309.955000] saved f4200010 value 00001f4c
278[  309.955000] saved f4200014 value 00000700
279[  309.955000] saved f4200018 value 00000700
280[  309.955000] saved f4100014 value 00000005
281[  309.955000] saved f4100004 value 0002a010
282[  309.955000] saved f4200024 value 009e03e5
283[  309.955000] saved f4100008 value 00058042
284[  309.955000] saved f4100010 value 00000004
285[  309.955000] Disabling IRQ 16 (pin 160)
286[  309.955000] Leaving IRQ 17 (pin 161) enabled
287[  309.955000] Disabling IRQ 18 (pin 162)
288[  309.955000] Disabling IRQ 19 (pin 163)
289[  309.955000] Disabling IRQ 48 (pin 164)
290[  309.955000] Disabling IRQ 49 (pin 165)
291[  309.955000] Disabling IRQ 50 (pin 166)
292[  309.955000] Disabling IRQ 51 (pin 167)
293[  309.955000] Leaving IRQ 53 (pin 193) enabled
294[  309.955000] Disabling IRQ 56 (pin 196)
295[  309.955000] sleep: irq wakeup masks: fffffffd,fffffdff
296[  309.955000] GSTATUS3 0x30476f48
297[  309.955000] GSTATUS4 0x00000000
298[  309.955000] restore fb000084 (restore 00000000, was 00000000)
299[  309.955000] GPIOA: CON 007e5fff => 007e5fff, DAT 00000000 => 00000000
300[  309.955000] GPIOB: CON 00155510 => 00155510, DAT 00000000 => 00000000
301[  309.955000] GPIOC: CON 55555155 => 55555155, DAT 0000a000 => 0000a000
302[  309.955000] GPIOD: CON 45555555 => 45555555, DAT 00004019 => 00004019
303[  309.955000] GPIOE: CON aaaaa6aa => aaaaa6aa, DAT 0000ffcd => 0000ffdf
304[  309.955000] GPIOF: CON 00000008 => 0000aaaa, DAT 00000026 => 00000023
305[  309.955000] GPIOG: CON 01aafc79 => 01aafe79, DAT 000066f4 => 000067f6
306[  309.955000] post sleep: IRQs 0x02000029, 0x00090210
307[  309.955000] IRQ 53 asserted at resume
308[  309.955000] s3c_pm_enter: post sleep, preparing to return
309[  309.955000] S3C PM Resume (post-restore)
310[  309.955000] restore fb0000c4 (restore 00000000, was 00000000)
311[  309.955000] restore fb0000c8 (restore 00000000, was 00000000)
312[  309.955000] restore fb0000d4 (restore 00001176, was 00001176)
313[  309.955000] restore fb0000d0 (restore 01551554, was 01551554)
314[  309.955000] restore fb0000d8 (restore 00001f7e, was 00001f7e)
315[  309.955000] restore f4000008 (restore 715fbd8d, was ffffffff)
316[  309.955000] restore f400001c (restore 0000f9ff, was 0000ffff)
317[  309.955000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
318[  309.955000] s3c2410-wdt: watchdog enabled
319[  309.955000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
320[  309.955000] s3c-i2c s3c2440-i2c: slave address 0x10
321[  309.955000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz
322[  309.955000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 64
323[  309.960000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
324[  309.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
325[  309.990000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
326[  309.990000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
327[  309.995000] s3c-sdi s3c2440-sdi: powered down.
328[  310.050000] wake disabled for irq 17
329[  310.090000] ENABLE
330[  310.190000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 0kHz div=0 (req: 0kHz). Bus width=0
331[  310.210000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
332[  310.230000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
333[  310.235000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
334[  310.240000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
335[  310.260000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
336[  310.265000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
337[  310.270000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0
338[  310.275000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2
339[  310.275000] jbt6k74 spi2.0: starting resume: 2
340[  310.335000] jbt6k74 spi2.0: resumed: 2
341[  310.390000] usb usb1: root hub lost power or was reset
342[  310.525000] Restarting tasks ...
343[  310.530000] usb 1-1: USB disconnect, address 2
344[  310.565000] done.
345[  310.570000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
346[  313.590000] pcf50633 0-0073: usb curlim to 500 mA