Timeline
06/22/09:
- 21:29 Changeset [5200] by
- Completed ECN0009.
- 21:24 Changeset [5199] by
- GPS work in progress
- 20:45 Changeset [5198] by
- started ecn removing audio amplifier
- 19:02 Changeset [5197] by
- Renamed ambiguous state "Review" to "Discuss". More new ECNs: 0018 Add …
- 16:01 Changeset [5196] by
- Added two more ECNs: 0016 Remove upper acceleration sensor (U7801) 0017 …
- 15:27 Changeset [5195] by
- Renamed state "Editing" to "Edit". Described ECN states in README. …
- 14:48 Changeset [5194] by
- One more ECN: 0008 Remove external GPS antenna connector and circuit …
- 14:45 Changeset [5193] by
- Completed ECNs 0003, 0005, and 0006. Added ECN0007: 0007 Remove KEEPACT …
- 13:59 Changeset [5192] by
- One more ECN: 0006 Either remove or populate R1701 (PMU.ADAPTSNS …
- 13:48 Changeset [5191] by
- Three new ECNs: 0003 Remove SHUTDOWN net and connect PMU.SHUTDOWN …
- 10:15 Changeset [5190] by
- PMU - some small fixes
- 10:10 Changeset [5189] by
- PMU - some small fixes
- 07:36 Changeset [5188] by
- work in progress (AUDIO)
- 07:08 Changeset [5187] by
- Updated memory.sch -Gave values to RPxxxx -Rotated RP2201 to match OM …
- 04:33 Changeset [5186] by
- replaced inductor symbol for B4902 with FILTER
- 03:43 Changeset [5185] by
- removed H- prefix of test points added ac voltage to varistors on the usb …
- 03:30 Changeset [5184] by
- Added ECN status file.
- 02:49 Changeset [5183] by
- Added schematics review status file.
- 02:38 Changeset [5182] by
- Allocated ECNs for Glamo and NOR removal.
- 02:35 Changeset [5181] by
- Added link to KLB0603K601SA data sheet (commented out for now).
- 02:32 Changeset [5180] by
- fixed some bugs and did some design changes werner mentioned
- 01:41 Changeset [5179] by
- Added convenience targets "gv" and "xpdf" to top-level Makefile and …
- 01:39 Changeset [5178] by
- memory_updates_06212009_1543.diff from Luke Duncan <duncan72187@…>
- 01:01 Changeset [5177] by
- reduced size of choke EXC24Bxxx symbol
- 00:33 Changeset [5176] by
- start working on audio codec schematic
- 00:32 Changeset [5175] by
- added AVCC_CODEC anf DVCC_CODEC to gta02_power.lib
06/21/09:
- 20:02 Changeset [5174] by
- Renamed all-sheets-ps to all-sheets
- 20:01 Changeset [5173] by
- Make overviews in PDF as well. Pre-shrink main schematics to A4. …
- 19:23 Changeset [5172] by
- Oops. SC32442 changes had been made without turning off pin sharing, …
- 19:03 Changeset [5171] by
- Upgraded compilation-making system for main schematics: - gta02-core.sch, …
- 18:15 Changeset [5170] by
- Rearranged SC32442-SDRAM according to Luke's schematics.
- 18:13 Changeset [5169] by
- Added convenience make target "make sch" to all places where we have a set …
- 13:38 Changeset [5168] by
- Added Alvaro's new GPS components to STATUS and AUTHORS. Regenerated …
- 01:19 Changeset [5167] by
- Update from Luke Duncan <duncan72187@…> Note that the CPU needs …
06/20/09:
- 21:11 Changeset [5166] by
- Proposed ECN process.
- 19:56 Changeset [5165] by
- GPS (work in progress)
- 19:46 Changeset [5164] by
- rearranged and resized sheets in gta02-core.sch
- 19:14 Changeset [5163] by
- GPS (work in progress)
- 19:13 Changeset [5162] by
- More power symbols
- 18:49 Changeset [5161] by
- added some missing References fixed some things Alvaro mentioned, missing …
- 18:07 Changeset [5160] by
- Add GPS sheet
- 17:52 Changeset [5159] by
- Add missing symbols - zxct1009 and upg2012tb for GPS
- 17:30 Changeset [5158] by
- added usb to gta02-core.sch added usb schematics
- 17:23 Changeset [5157] by
- added USB_VBUS to gta02_power.lib
- 16:14 Changeset [5156] by
- PMU (work in progress) - Fix annotation
- 16:11 Changeset [5155] by
- PMU (work in progress)
06/19/09:
- 23:51 Changeset [5154] by
- Updated generated libs for R_US change.
- 23:50 Changeset [5153] by
- Switched to combined library.
- 23:38 Changeset [5152] by
- Added text explaining the limited purpose of this file as well.
- 23:15 Changeset [5151] by
- New "schematics" for component editing only, so that we can use only the …
- 22:56 Changeset [5150] by
- Fixed placement of command in the LIBS line of .sch files.
- 21:37 Changeset [5149] by
- K4M51323PE was incorrectly defined as a power symbol.
- 21:33 Changeset [5148] by
- changed R_US to a more symetrical design
- 13:31 Changeset [5147] by
- PMU (work in progress)
- 13:31 Changeset [5146] by
- Add more power symbols
- 12:55 Changeset [5145] by
- Definition of SDRAM_1V8 was called IO_3V3. Oops. Added powers to expanded …
- 12:37 Changeset [5144] by
- Missed the other SDRAM_1V8.
- 12:26 Changeset [5143] by
- Added memory.sch by Luke Duncan <duncan72187@…> (Changed to use …
- 10:21 Changeset [5142] by
- Add GTA02 power
06/18/09:
- 21:41 Changeset [5141] by
- Add btp-03ja4g library
- 20:46 Changeset [5140] by
- PMU (ongoing)
- 20:35 Changeset [5139] by
- PMU (ongoing)
- 10:44 Changeset [5138] by
- Added Alvie's junction enlargement patch.
- 10:38 Changeset [5137] by
- More work on PMU - output stages
- 10:37 Changeset [5136] by
- Fix pin positions of PMU chip
- 01:44 Changeset [5135] by
- Added r_us to the meta- and generated files.
06/17/09:
- 21:34 Changeset [5134] by
- PMU schematic (work in progress). Add some basic resistors and connections
- 21:07 Changeset [5133] by
- Add R US-like symbol
- 16:54 Ticket #2296 (Cannot disable suspend anymore) created by
- In Om2009 Testing 5, setting "suspend-time" to -1 in Paroli, or "Suspend …
06/16/09:
- 19:19 Ticket #2295 (cpufreq: serial ports fail after suspend/resume: rxerr: port=1 ch=0x24, ...) created by
- Steps to reproduce: 1) boot andy-tracking 5a6ed99264c704e5 with Rask's …
- 19:03 Changeset [5132] by
- Removed 2. GND pin in the symbol of MS2V-T1S Reorderd pin numbers …
- 15:24 Changeset [5131] by
- Example for non-numerical pin numbers.
06/14/09:
- 22:48 Changeset [5130] by
- Review of: - rt9013, rt9702a, rt9711_bd_5, si1040x - sw_push_4, vibrator, …
- 07:45 Changeset [5129] by
- Changed the PMU's VISA from BiDi? to Passive. Reported by Rene.
- 02:50 Changeset [5128] by
- Review of k4m51323pe and pcf50633-04-n3
06/13/09:
- 21:39 Changeset [5127] by
- changed DTC123 pin numbering accordingly to what NXP and ON Semi. is using
06/12/09:
- 22:57 Changeset [5126] by
- Review of aat1275, ht210 and lis302dl
- 16:21 Changeset [5125] by
- Include all possible signals for multi-use pins
- 07:48 Changeset [5124] by
- Revert previous commit. Right adjustment confuses plotting.
- 07:44 Changeset [5123] by
- Updated sc32442.lib to use right-adjusted text for pseudo pins. Requires …
- 06:48 Changeset [5122] by
- Review of 74x1g125, 74x2g126, exc24cb102u, emh4 and varistor
- 06:29 Changeset [5121] by
- Removed text alignment. Jean-Pierre beat us to it :-)
- 00:36 Changeset [5120] by
- Reviewed "coax" and "dfbm-cs320". Some changes to dfbm-cs320: - changes …
06/11/09:
- 16:12 Changeset [5119] by
- Added Rene's component from June 7: - JKK4401: Headset jack - JAR02-062101 …
06/10/09:
- 22:09 Changeset [5118] by
- Review fa2012, wm8753l and 74x1g00_5
- 15:22 Changeset [5117] by
- Andre reviewed the SD/SIM connector smsn16. Added a remark that we name …
- 14:51 Changeset [5116] by
- Andre reviewed atr0610.
- 02:11 Changeset [5115] by
- Integrated Rene's recent components: - added new components to the merged …
06/09/09:
- 16:55 Changeset [5114] by
- Bumped priority of text alignment. Added a bit more details about the push …
- 16:19 Changeset [5113] by
- STATUS: - clarified that "component" is the file name (of the .lib file) …
- 01:32 Changeset [5112] by
- fixes to the atr0635 from Rene Harder (rehar@…) VCC2 change to E4, …
06/08/09:
- 20:00 Changeset [5111] by
- Update review status
- 17:07 Changeset [5110] by
- I've done a partial review of the atr0635
- 16:33 Changeset [5109] by
- update AUTHORS and STATUS
- 16:16 Changeset [5108] by
- Additional components from Rene Harder rehar@… - gps chipset …
- 16:09 Changeset [5107] by
- Additional component info - from rehar@…
- 15:10 Changeset [5106] by
- First draft of the (incomplete) KiCad? feature wishlist.
- 14:36 Changeset [5105] by
- STATUS updates: - Tobias reviewed si1040x, smsn16, sw_push_4, tas4025a - …
- 02:10 Changeset [5104] by
- Tobias reviewed the SC32442 as well.
06/07/09:
- 18:07 Ticket #2294 (xf86-video-glamo: stopping X can crash the whole system (not even JTAG ...) created by
- Steps to reproduce: 1) sudo gdb 2) attach <pid-of-X> 3) break …
- 00:27 Changeset [5103] by
- Andre's review of the sc32442 is finished.
- 00:15 Changeset [5102] by
- Review of mini-usb connector
06/06/09:
- 23:56 Changeset [5101] by
- Andre found a lot more table 1-1 victims: - VD16/GPD8/SPIMOSI1 is actually …
- 19:16 Changeset [5100] by
- review of b7840, emh4, exc24cb102u, fa2012, ht210, r3113d, rt9013, …
- 17:46 Changeset [5099] by
- nFLG is Open Drain
- 17:27 Changeset [5098] by
- nFLG is an open-drain output
- 16:35 Changeset [5097] by
- More 2442 issues found by Andre: - VDDIARM_1 should be VDDIARM - rename …
- 16:18 Changeset [5096] by
- Andre reviewed the si1040x. Updated compilations for recent fixes.
- 16:03 Changeset [5095] by
- correct pin numbering of pin 5
- 03:45 Changeset [5094] by
- A bit of cleanup and small improvements of components/STATUS: - added …
06/05/09:
- 22:16 Changeset [5093] by
- The cpu-power sheet was not included in the sheet collection.
- 20:27 Changeset [5092] by
- Review atr0610
- 20:15 Changeset [5091] by
- Review aat1275 - change FLT pin type
- 19:49 Changeset [5090] by
- Add Rene's LCD connector FH23-39S-03SHW for TD028TTEC1 module
- 19:47 Changeset [5089] by
- Add Rene's WLAN connector header and socket
- 00:11 Changeset [5088] by
- Updated generated libraries.
- 00:10 Changeset [5087] by
- Andre had reviewed the S3C2442.
- 00:10 Changeset [5086] by
- Renamed NCON0 to NCON. Reported by Andre <andre.knispel@…>
06/04/09:
- 22:03 Ticket #2293 (linux/andy-tracking: gps does not always honor power_on) created by
- Steps to reproduce: 1) echo 1 > …
06/03/09:
- 22:44 Changeset [5085] by
- Marked components reviewed by Andre <andre.knispel@…>
- 20:03 Changeset [5084] by
- Make PCF50633 VISC/REFC pins passive
- 19:41 Changeset [5083] by
- Add DFBM-CS320 symbol from Rene
- 19:41 Changeset [5082] by
- Update component review status
06/02/09:
- 10:15 Changeset [5081] by
- Update review list
06/01/09:
- 20:07 Changeset [5080] by
- Accelerometer: corrected naming of multi-use pins and made SDI and SDO …
05/30/09:
- 00:36 Changeset [5079] by
- Added IT3205BE by Rene Harder <rehar@…> Also added the .lib files …
- 00:00 Changeset [5078] by
- Added U7601 (ATR0610-PQQW) by Rene Harder <rehar@…>
05/29/09:
- 23:45 Changeset [5077] by
- Added EPCOS B7840 (U7603), by Rene Harder <rehar@…>
- 23:32 Changeset [5076] by
- We can use KiCad?'s CRYSTAL for X7602.
- 23:21 Changeset [5075] by
- Added R3113 symbol, by Rene Harder <rehar@…>
- 22:56 Changeset [5074] by
- Added vibrator page found by Rene Harder <rehar@…> Now mkdsv …
- 22:46 Changeset [5073] by
- Add KiCad? base revision to series.
- 20:51 Changeset [5072] by
- Review K4M51323PE - fix DQM pins
05/28/09:
- 20:36 Changeset [5071] by
- Dropped old-boost-build-fix.patch from series. Better to upgrade libboost.
- 16:33 Changeset [5070] by
- 04:22 Changeset [5069] by
- Added the new components to compilations and supplementary info files.
- 01:06 Changeset [5068] by
- New script to maintain a cache of data sheets. For quick access, the …
05/27/09:
- 19:48 Changeset [5067] by
- Add push switch 4 pins symbol
- 19:45 Changeset [5066] by
- Add HT210 dual color LED common anode symbol
- 19:39 Changeset [5065] by
- Add EMH4 dual transistor symbol
- 18:43 Changeset [5064] by
- Added a few parts and data sheet links.
05/26/09:
- 23:24 Changeset [5063] by
- Added new sheet SD-SIM (cards.sch)
- 23:21 Changeset [5062] by
- Renamed smsn16-02-c to smsn16, added smsn16, mini_usb_b, and vibrator to …
- 22:14 Ticket #2292 (Phone suspends during call) created by
- I received a call and while talking the phone suspended making me loose …
- 22:04 Changeset [5061] by
- Forgot the _5 suffix of 74x1g00_5. Renamed it and moved label a bit. Also …
- 21:36 Changeset [5060] by
- Renamed the three small logic chips and id the usual updates: 74aup1g00 …
- 20:42 Changeset [5059] by
- Updated FA2012 in compilation and added to expanded view.
- 20:40 Changeset [5058] by
- Given that KiCad? alread has partial overline support, the whole …
- 20:38 Changeset [5057] by
- arc exports have been accepted in KiCad? mainline.
- 10:30 Changeset [5056] by
- Add SIM/SDCARD connector
- 10:16 Changeset [5055] by
- Add mini-USB alias to CMK_A425-206162-001
- 10:14 Changeset [5054] by
- Add mini-USB B connector
- 10:09 Changeset [5053] by
- Update AUTHORS to depict new components
- 10:09 Changeset [5052] by
- Add vibrator (generic) with alias
- 09:59 Changeset [5051] by
- Fix pin numbering and naming of filter pins according to ACXC datasheet
- 01:39 Changeset [5050] by
- Updated compilation, expanded view, and ancillary information files for …
05/25/09:
- 20:08 Changeset [5049] by
- Fix DTC123 name (was DCT123)
- 20:01 Changeset [5048] by
- Fix DTC123 name (was DCT123)
- 19:59 Changeset [5047] by
- Add transistor with resistors DCT123 (DCT123JETL)
- 19:50 Ticket #2291 (AT+CCLK sometimes returns corrupted time) created by
- Hi, I polled AT+CCLK? once per second for a day. I got the correct result …
- 19:38 Changeset [5046] by
- Add power switch RT9711 (RT9711BPB)
- 19:35 Changeset [5045] by
- Add lowpass filter FA2012
- 11:16 Changeset [5044] by
- Machine-readable mapping between components names, data sheets, and …
- 09:58 Changeset [5043] by
- Renamed wm8753l to wm8753lgefl because there's also a BGA package with …
- 09:46 Changeset [5042] by
- Renamed rt9701a to rt9701, because the symbol is the same for rt9701 and …
- 09:39 Changeset [5041] by
- Renamed RT9013 to RT9013_B because there's a different package with …
- 09:23 Changeset [5040] by
- Renamed AAT1275 to AAT1275IRN. That's the 16-pin variant. There's also a …
- 06:43 Changeset [5039] by
- Added varistor to compilation and expanded view.
05/24/09:
- 21:11 Changeset [5038] by
- Remove varistor pin numbering
- 20:56 Changeset [5037] by
- Add varistor symbol.
- 16:55 Changeset [5036] by
- Reviewed all the new components.
- 16:50 Changeset [5035] by
- Updated compilation libs and expanded view for new components.
- 16:26 Ticket #2290 ([USB] network mac regression : host mac = device mac) created by
- Since the official mac change on USB networking, on many distros the host …
- 15:52 Changeset [5034] by
- Fix name of lib in AUTHORS
- 15:43 Changeset [5033] by
- Make internal EXC24CV102U coils explicit
- 15:30 Changeset [5032] by
- Fix component name for EXC24CV102U (was EXC240CV102U)
- 13:25 Changeset [5031] by
- Add symbol for EXC240CB102U
- 10:47 Changeset [5030] by
- Add symbols for RT9702A and RT9013
05/23/09:
- 23:54 Changeset [5029] by
- Review status of the components.
- 23:53 Changeset [5028] by
- lis302dl.lib - RESERVED pins need to connect to VDD and GND, respectively. …
- 23:36 Changeset [5027] by
- Set orientation to landscape.
- 21:12 Changeset [5026] by
- KiCad? eats the numbers on the horizontal crystal pins when printing. Not …
- 21:05 Changeset [5025] by
- Crystal pin order update by Alvaro Lopes <alvieboy@…>
- 18:56 Changeset [5024] by
- si1040x.lib cleanup by Alvaro Lopes <alvieboy@…> The new GPS sheet …
- 18:43 Changeset [5023] by
- Added sn74lvc2g126.lib by Alvaro Lopes <alvieboy@…>
- 17:45 Changeset [5022] by
- Updated generated libraries and expanded view for new components.
- 17:39 Changeset [5021] by
- Added SI1040X (U7610,U7609) by Alvaro Lopes <alvieboy@…>
- 17:26 Changeset [5020] by
- Minor cleanup of gerbview-export-arcs.patch and added new task to …
- 17:14 Changeset [5019] by
- Added crystals X1501 and X1701 by Alvaro Lopes <alvieboy@…>
- 17:06 Changeset [5018] by
- Added U4901 and U4902 made by Alvaro Lopes <alvieboy@…>
Note: See TracTimeline
for information about the timeline view.
