Timeline
09/14/09:
- 11:32 Changeset [5640] by
- Apply ECN0035, and fix C8004,C8005 footprint
- 02:02 Changeset [5639] by
- minor modem layout changes.
- 00:58 Changeset [5638] by
- -PWR_IRQ, +nPWR_IRQ. It's active low. Rask Ingemann Lambertsen …
- 00:46 Changeset [5637] by
- - new IO2V8 power net for Telit GSM modem - new component NTDG1100L - …
09/13/09:
- 15:16 Changeset [5636] by
- - README: added link to the GUI manual - added a conceptual explanation of …
- 13:11 Changeset [5635] by
- - inst.c: cleanup_inst leaked memory when using special pads - changed pad …
- 11:58 Changeset [5634] by
- - the set of layers of a pad is now maintained in the instance, so that we …
- 01:15 Changeset [5633] by
- - gui_util.c: make container clean-out globally available as vacate_widget …
09/12/09:
- 18:02 Changeset [5632] by
- - components/INFO: added a bunch of Telit modem documents
- 17:48 Changeset [5631] by
- - Makefile: let make do the and-ing of the steps in "make update" - …
- 17:40 Changeset [5630] by
- - added that one should run "make dsv-rebuild" if data sheets are renamed.
- 17:37 Changeset [5629] by
- The "dsv" system now supports multiple data sheets per component multiple …
- 09:34 Changeset [5628] by
- - added "make update" that combines "svn update" with remaking the …
09/11/09:
- 20:34 Changeset [5627] by
- - added solder mask pad type (patch by Rene Harder)
- 01:40 Changeset [5626] by
- - bare pads are now drawn in orange, so that one can see if a pad has a …
- 01:12 Changeset [5625] by
- - top-level "make gen" and "make upload" now also visit expanded/ and …
09/10/09:
- 20:36 Ticket #2310 (charging N900 with gta02 causes the gta02 to overheat) created by
- Steps to reproduce: 1) modprobe ochi-hcd 2) echo host > …
09/09/09:
- 21:41 Ticket #2277 (Wireless does not work with the 2.6.29 kernel) closed by
- fixed: So ifconfig down doesn't help power saving but the driver is not screwed …
- 21:31 Ticket #1843 (u-boot's DFU upload garbles data at block boundary) closed by
- fixed: Looks like it was fixed since nobody who was using recent u-boot …
- 21:28 Ticket #1991 ([Suspend] unable to suspend, just stay black screen after wake up by power ...) closed by
- fixed
- 21:27 Ticket #2020 (USB connection messes with suspend/resume state machine) closed by
- fixed: Not kernel/bootloader issue. Not reproducible with the latest SHR.
- 21:26 Ticket #1996 (display stays blank at incoming call) closed by
- fixed
- 21:23 Ticket #1375 (FreeRunner: power_class also working with Neo1973 batteries) closed by
- fixed: We do it now. :)
- 21:22 Ticket #1336 (screen shifted and duplicated after resume in landscape mode) closed by
- fixed
- 21:19 Ticket #2235 (Monochrome display on resume) closed by
- fixed
- 21:17 Ticket #2211 (Windows instant reboot while connecting Freerunner on USB) closed by
- fixed
- 21:16 Ticket #2177 (andy-tracking/de473ca8: unable to powerdown GPS) closed by
- fixed
- 21:12 Ticket #2162 (Changing screen modes (QVGA) corrupted in stable-tracking) closed by
- fixed: QVGA works for quite some time already.
- 21:09 Ticket #2068 ([kernel] Video input device support is not enabled by default) closed by
- community: To be discussed with distro maintainers. Closing as "community".
- 21:06 Ticket #2062 (xglamo doesn't implement any power management) closed by
- fixed: Since xglamo is no longer relevant, closing. AFAIK power management is …
- 21:00 Ticket #2025 (Glamo problem: 4GB SD I/O errors with glamo_mci.sd_max_clk=10000000 and no ...) closed by
- fixed: Please try with the maximum sd_drive (sd lines drive strength) setting. …
- 20:53 Ticket #1985 (no auto-suspend after some time) closed by
- invalid: Looks like qpe issue. Please use a supported distro instead.
- 20:51 Ticket #1948 ([Boot screen]Please Change initial Boot to uBoot-image) closed by
- invalid: Unrelated to system software.
- 20:49 Ticket #1929 (Wlan stops working after some time...) closed by
- fixed: Lack of feedback -> closing. Please reopen if you can reproduce with …
- 20:47 Ticket #1876 (screen does not turn on on incoming call) closed by
- fixed: Works in modern distros.
- 20:46 Ticket #1857 (Powering down GSM module kills resume) closed by
- fixed: Not reproducible with modern systems.
- 20:40 Ticket #1811 (Consider including NILFS2 filesystem support) closed by
- wontfix: Please reopen if interested.
- 20:39 Ticket #1730 (SELinux Kernel Support) closed by
- wontfix: Please reopen if still interested.
- 20:36 Ticket #2293 (linux/andy-tracking: gps does not always honor power_on) closed by
- fixed
- 20:34 Ticket #1702 (Switching of my wifi using power button) closed by
- invalid: No feedback from reporter, can not reproduce, closing as invalid.
- 20:32 Ticket #1687 (FR LCD goes blank suddenly) closed by
- fixed
- 20:30 Ticket #1599 (Suspend / resume breaks audio) closed by
- fixed: Modern distros don't use neither PA nor speech-dispatcher.
- 20:25 Ticket #1742 ([illume] even the WiFi is off, the icon is still there in illume bar) closed by
- fixed: Turning off wifi with recommended method (either unbinding s3c-mci or …
- 20:22 Ticket #1736 ([x11] Device suspends while enlightenment/qpe/X are still starting) closed by
- invalid: Not system software issue, not reproducible with maintained distros.
- 20:16 Ticket #1662 ([GSM] not working properly after x hours of usage) closed by
- invalid: Closing as "not system software, and use supported distro"
- 19:18 Changeset [5624] by
- BT module footprint update
- 07:43 Changeset [5623] by
- started BT module footprint
- 02:17 Changeset [5622] by
- lis302dl.fpd - clean-up & comments - changed pin size - changed 1.pin …
- 00:28 Changeset [5621] by
- added LIS302D LGA14 footprint
09/08/09:
- 21:37 Changeset [5620] by
- - postscript.c: don't try to print empty pad names, or we'll have a hard …
- 21:35 Changeset [5619] by
- - annotation for gsm antenna - MODEM_ON and MODEM_RST are both inverted …
- 21:24 Changeset [5618] by
- Modem changes - Remove GSM power switch cirtuit (U1705) - Route MODEM_ON …
- 21:11 Changeset [5617] by
- wm8753fl.fpd - added design guidelines to INFO - change dimensions …
- 07:59 Changeset [5616] by
- wm8753fl.fpd - added solder paste layer for thermal land
- 05:37 Changeset [5615] by
- wm8753fl.fpd: - added pad width measurement - fixed exposed land overlap …
- 04:22 Changeset [5614] by
- added WM8753FL footprint
- 00:27 Changeset [5613] by
- CNC tools for prototype development, first batch of them.
09/07/09:
- 10:04 Changeset [5612] by
- Update ECN status
09/05/09:
- 23:35 Changeset [5611] by
- Rask's SPI 0R ecn - Rask Ingemann Lambertsen <ccc94453@…>
- 23:28 Changeset [5610] by
- Status update
- 23:26 Changeset [5609] by
- - modules/stdpass.fpd: changed silk with from 2 mil to 5 mil, like …
- 23:25 Changeset [5608] by
- Modem references in range 81xx, various modem changes.
- 21:57 Changeset [5607] by
- implemented ECN0037
- 21:31 Changeset [5606] by
- implemented ECN0036
- 21:19 Changeset [5605] by
- - canceled ECN0018 "Add beads/filters to audio signals leaving/entering …
- 00:47 Changeset [5604] by
- modem component references, most things looking pretty good now.
09/02/09:
- 14:05 Changeset [5603] by
- - documented that we also need the KiCad? component library. Based on a …
- 10:12 Changeset [5602] by
- Replaced Panasonic reference with a more useful one.
- 09:10 Changeset [5601] by
- - modules/stdpass.fpd: added over all length measurement - modules/INFO: …
- 02:55 Changeset [5600] by
- modem updates.
09/01/09:
- 06:58 Changeset [5599] by
- - GETTING-STARTED: we now have "lazy" PDF for footprints as well
- 06:57 Changeset [5598] by
- - use rsync also for top-level Makefile and expanded/Makefile - web/: …
- 04:12 Changeset [5597] by
- more modem updates, yes we do need DTR (AT cmd reference, pg139)
- 03:54 Changeset [5596] by
- GE865 documentation overview.
- 01:57 Changeset [5595] by
- add some notes on remaining tasks
- 01:37 Changeset [5594] by
- further modem corrections.
08/31/09:
- 22:08 Changeset [5593] by
- - oops, forgot to commit. Thanks, Dave.
- 18:01 Changeset [5592] by
- Added antenna WTE06016 to mkloe script
- 05:28 Changeset [5591] by
- - added commit to ecn0010 and ecn0015 - removed ecn0020 from open ecn list …
- 00:31 Changeset [5590] by
- - added commit to ecn0032 and ecn0033 - added missing footprint values to …
- 00:23 Changeset [5589] by
- implemented ecn0033
- 00:18 Changeset [5588] by
- implemented ecn0032
08/30/09:
- 22:17 Changeset [5587] by
- - scripts/all-sheets: added outline information for PDF
- 21:38 Changeset [5586] by
- - postscript.c: added outline information for PDF - postscript.c: ignore …
- 20:39 Changeset [5585] by
- - modules/mkloe: added -one-ps option to convert all modules to a combined …
- 15:20 Changeset [5584] by
- Add antenna and small fixes
- 15:19 Changeset [5583] by
- Add ANT8001 (WTE06016)
- 13:38 Changeset [5582] by
- New component CON8001 (mm8430-2610)
- 13:38 Changeset [5581] by
- New component CON8001 (mm8430-2610)
- 13:28 Changeset [5580] by
- WLAN fixes (refs and chip symbol)
- 08:04 Changeset [5579] by
- - Makefile: use "make loe" instead of running mkloe directly, so that we …
- 08:04 Changeset [5578] by
- - postscript.c: added some code for frame display, but I'm not happy with …
08/29/09:
- 21:54 Changeset [5577] by
- modem updates - still WIP
- 20:39 Changeset [5576] by
- - changed WLAN component reference pattern in overview sheet from 79xx to …
- 20:21 Changeset [5575] by
- 1st shot at the telit modem - work in progress
- 19:48 Changeset [5574] by
- Fix misc issues with wlan
- 15:10 Changeset [5573] by
- Add new WLAN RF ECN
- 14:45 Changeset [5572] by
- Fix wlan
- 14:31 Changeset [5571] by
- New WLAN on-board
- 14:30 Changeset [5570] by
- Rename old WLAN connector
08/28/09:
- 22:47 Changeset [5569] by
- - components/INFO: symbol name of GE865 was "ge864"
- 22:33 Changeset [5568] by
- - moved ECNs 0032 and 0033 to "Execute" - reviewed and closed ECN0022 - …
- 22:27 Changeset [5567] by
- new ecn0034 - route additional SPI and GPIO pins to debug connector
- 20:29 Changeset [5566] by
- - cpu.sch: moved 33R from R1562 to R1561. (It's the blue LED.) - added …
- 16:53 Changeset [5565] by
- Execute ecn0009 - remove LED transistors.
- 16:00 Changeset [5564] by
- Andre reviewed the memory.sch
- 15:51 Changeset [5563] by
- - ECN0016 has R7809 twice. Changed one to R7808. - modules/tst.fpd: added …
- 10:09 Changeset [5562] by
- Fix TEST->TST footprint
- 03:01 Changeset [5561] by
- second try for HDQ - now move to GPD0! :-)
- 01:44 Changeset [5560] by
- Measurement text size looked (almost) right on the screen but the size was …
- 01:17 Changeset [5559] by
- reinstate the lost HDQ
- 01:16 Changeset [5558] by
- - forgot to name tst.fpd, silly …
08/27/09:
- 17:00 Ticket #2309 (hangs during resume after printing GSTATUS4) created by
- Steps to reproduce (occurs very rarely!): 1) suspend the device 2) press …
- 16:24 Changeset [5557] by
- Cause in TODO, effect: - pad type wasn't optional
- 12:59 Changeset [5556] by
- rename INTO/INT0 net, and note some of the other renamed nets
- 11:46 Changeset [5555] by
- Added "tst" footprint (test point, 1.2 mm diameter)
- 11:45 Changeset [5554] by
- - added pad type (for non-solder and solder-paste-only pads) to FPD …
- 11:30 Changeset [5553] by
- review accel removal changes
- 11:01 Changeset [5552] by
- Made interactive selection of measurement points a little less …
- 11:00 Changeset [5551] by
- - modules/332fbga-p05.fpd: added measurements
- 10:28 Changeset [5550] by
- Add footprint reporter (using BOM list)
- 09:36 Changeset [5549] by
- Reviewed ECN0029 and the whole PMU. Closed ECN0029.
08/26/09:
- 23:39 Changeset [5548] by
- - removed CRLF in ECN0032 - changed C3008 to C3006, added C4406 and added …
- 23:37 Changeset [5547] by
- - moved ECN0016 to "Execute" (review, really)
- 23:36 Changeset [5546] by
- - cpu.sch: implemented nACCEL_CS removal, freeing EINT8/GPG0 - io.sch: …
- 23:20 Changeset [5545] by
- - scripts/all-sheets: added WLAN sheet - bt.sch: moved WLAN to separate …
- 23:06 Changeset [5544] by
- - modules/332fbga-p05.fpd: set package name to "332FBGA-P0.5" (before, it …
- 22:48 Changeset [5543] by
- ge865 pin type changes
- 16:06 Changeset [5542] by
- - destroy_obj: when deleting width expressions, check that they're …
- 11:22 Changeset [5541] by
- Added dual transistor. More changes.
- 10:12 Changeset [5540] by
- Continuing on GE864 EVB. Flipped the module for through-hole BGA mounting.
- 08:03 Changeset [5539] by
- GE864 evaluation board. (In progress)
08/25/09:
- 20:43 Ticket #2308 ([Om 2009] simplelock should return) created by
- the screen lock should return in om2009. when pressing AUX button the …
- 14:00 Changeset [5538] by
- - ecn0016: We don't need nACCEL_CS (suggested by Rask Ingemann Lambertsen …
08/24/09:
- 22:38 Changeset [5537] by
- - BT: changed value of C1 to 200fF - AUDIO: added additional ECNs
- 22:27 Changeset [5536] by
- - added 332-FBGA for Samsung SC32442B
- 21:41 Changeset [5535] by
- - modules/bga96-8x12-0mm8.fpd: changed package name to FBGA96-P0.8 - …
- 18:53 Changeset [5534] by
- - renamed directory screens/ to manual/ - convert icons in the manual from …
- 15:35 Changeset [5533] by
- CPU and IO global label fixes by Rask Ingemann Lambertsen - cpu.sch: …
08/23/09:
- 23:37 Changeset [5532] by
- - changed ECN0022 according to use tantalum caps - replaced symbol of …
- 00:55 Changeset [5531] by
- - when displaying loop iterations, we now use the active count, not just …
- 00:48 Changeset [5530] by
- - set status of ECN0015 to Execute - set status of ECN0031 to Execute - …
- 00:04 Changeset [5529] by
- - added Commit info to ECN0015 - added beads to INFO - replaced bead in …
08/22/09:
- 23:23 Changeset [5528] by
- removed R4407/4405 from audio sheet
- 21:00 Changeset [5527] by
- - new visualization option: show all frames or show only current frame - …
- 18:01 Changeset [5526] by
- Added draft of 48QFN for WM3236AQ (WLAN). 2*13+2*11 pads, dimensions …
- 17:58 Changeset [5525] by
- Made life in mil-land a little less painful. - .fpd file format: new …
- 16:29 Changeset [5524] by
- Bug-fixing ... - obj.c: embarrasingly, the default offset wasn't a …
- 15:18 Changeset [5523] by
- - inst.c: we can drag points at a frame base again
- 14:27 Changeset [5522] by
- Selection now tries to help us not to get lost. - postscript.c: started …
- 13:02 Changeset [5521] by
- Update ECN0029 status
- 11:09 Changeset [5520] by
- - docs/GETTING-STARTED: added fped's new font dependency - …
- 10:58 Changeset [5519] by
- - postscript.c: added DSC comments - postscript.c: generate a page for …
- 10:58 Changeset [5518] by
- - modules/stdpass.fpd: enjoy our new freedom and adjust measurement offset …
- 01:28 Changeset [5517] by
- Improving Postscript output (on-going) - postscript.c: added page layout …
08/21/09:
- 21:50 Changeset [5516] by
- When deleting frame "foo" in root->foo->bar and then linking bar from …
- 21:19 Changeset [5515] by
- - calculation of a rounded pad's diagonal is now more sensible. We use the …
- 20:20 Changeset [5514] by
- - measurement offsets can now use variables. We evaluate the offset during …
- 19:28 Changeset [5513] by
- Small cleanups
- 18:29 Changeset [5512] by
- Move stuff in PMU to proper place so we have more space at outputs
- 18:09 Changeset [5511] by
- Fix resistor labels
- 18:04 Changeset [5510] by
- Fix position of stuff
- 18:03 Changeset [5509] by
- Apply ECN0029, and reorder caps
- 17:20 Changeset [5508] by
- Update ECN0029 status
- 15:13 Ticket #2307 (Illume keyboard "End" function not reaching end of line) created by
- I used to have an (old!) SIM card only allowing 12 characters per contact …
- 14:54 Ticket #2306 (Phone log opening multiple times - happening as part of ticket #2305) created by
- After the scenario described in ticket #2305 has developed itself, the …
- 14:41 Ticket #2305 (GSM connection hangs up when during a call a second incoming call is not ...) created by
- With my mobile subscription I have the option to receive another call …
- 13:15 Changeset [5507] by
- Update WM3236AQ symbol
- 10:34 Changeset [5506] by
- - delete.c: added more destructor functions - deallocate all our data …
- 08:45 Changeset [5505] by
- - added comment about ECN0031 to cpu sheet - marked pin EINT7/GPF7 as NC
- 08:05 Changeset [5504] by
- - added new ECN0032, EMI and ESD protection for headset jack - added …
- 05:59 Changeset [5503] by
- implemented ECN0031
- 04:20 Changeset [5502] by
- review of ECN0031
- 02:37 Changeset [5501] by
- added missing ground R3010 for 2/3-wire mode detection
08/20/09:
- 23:03 Changeset [5500] by
- - added WM3236AQ and BF2520 to expanded bt.sch - removed GTA02_WLAN_S from …
- 22:10 Changeset [5499] by
- added missing ESD protection for speaker D3001/3002
- 19:10 Changeset [5498] by
- Add WM3236AQ (Wireless module)
- 19:08 Changeset [5497] by
- Missing library commit
- 18:32 Changeset [5496] by
- Add component BF2520
- 15:59 Changeset [5495] by
- - components/mkloe: added ADG3304 - added ADG3304 to BT sheet of expanded …
- 13:49 Changeset [5494] by
- New component ADG3304 info
- 13:46 Changeset [5493] by
- New component ADG3304
- 13:45 Changeset [5492] by
- New component ADG3304
- 07:14 Changeset [5491] by
- - ECN0031 (codec interrupt): added details of the conversion - ECN0031: …
- 00:13 Changeset [5490] by
- - postscript.c: always run flattenpath before pathbbox - postscript.c: …
08/19/09:
- 16:53 Changeset [5489] by
- - Werner reviewed the GE865 module
- 16:39 Changeset [5488] by
- - fped now requires bash
- 16:38 Changeset [5487] by
- - Makefile: now requires /bin/bash (for PIPESTATUS) - Makefile: use …
- 12:36 Changeset [5486] by
- - ECN0030 (modem) complement: level-shifting with a resistive divider
- 09:31 Changeset [5485] by
- - finished GE865 footprint - added GE865 to modules/mkloe
- 01:49 Changeset [5484] by
- - fixed precedence of unary minus, so that -(a+b) isn't printed as -a+b - …
- 00:08 Changeset [5483] by
- Added experimental GE865 module. (Incomplete - need to add measurements …
- 00:03 Changeset [5482] by
- - replaced awkward FOR_GLOBAL_INSTS / FOR_PKG_INSTS sequence with single …
08/18/09:
- 22:57 Changeset [5481] by
- - stupid typo made us crash when setting the package name
- 22:52 Changeset [5480] by
- Finally found a nice way to draw arcs in the GUI. - we freed a package's …
08/17/09:
- 23:00 Changeset [5479] by
- - made stdpass.fpd generate all its footprints (upgrade fped !) - …
- 22:42 Changeset [5478] by
- We can now generate part families. - README: added build prerequisites - …
- 19:33 Changeset [5477] by
- - GETTING-STARTED: added fped build prerequisites
- 19:17 Changeset [5476] by
- - "make dep" makes a lot more sense than "make del", as Nathael pointed …
- 02:03 Changeset [5475] by
- - new ECN0030: Replace Calypso with Telit GE865 - cancelled ECN0023: don't …
- 01:40 Changeset [5474] by
- - added tags for review of the PMU side to ECN0003 and ECN0007 as well
- 01:29 Changeset [5473] by
- - ECN0003, ECN0007: added commit entries for CPU-side changes
- 01:27 Changeset [5472] by
- - ECN0003 through 0007: added commit and review entires - ECN0007: added …
- 01:03 Ticket #2304 (gllin or gps chip produces wrong time stamps) created by
- $ ln -s /usr/share/zoneinfo/Europe/Athens /etc/localtime $ date Mon Aug 17 …
- 00:56 Changeset [5471] by
- ECN0029: added review by Joerg and bumped it to "Discuss".
- 00:51 Changeset [5470] by
- Added more details on ECN0029.
08/16/09:
- 21:13 Changeset [5469] by
- Started ECN0029, move 0R resistors on PMU outputs.
- 21:06 Changeset [5468] by
- - modules/INFO: removed .fpd extension from footprint name - modules/: …
- 15:16 Changeset [5467] by
- Apply ECN0003 to ECN0007
- 14:58 Changeset [5466] by
- Fix footprint names
- 14:42 Changeset [5465] by
- - added GETTING-STARTED instructions for installing fped and for accessing …
- 14:29 Changeset [5464] by
- - modules/mkloe: script to generate a unified library from the .fpd files …
- 14:24 Changeset [5463] by
- - ctime(3) already provides a newline, so don't add an extra one to the …
- 14:04 Changeset [5462] by
- - adjust measurement bbox for projection (still not perfect, but better) - …
- 13:21 Changeset [5461] by
- Added Postscript outout for measurements, plus assorted changes. - …
- 07:05 Changeset [5460] by
- - when editing a value list, we need to return the values and free them in …
- 06:12 Changeset [5459] by
- Columns and loops can now be entered in one step as var = val, val, ... …
- 03:51 Changeset [5458] by
- - added KiCad? export of arcs - added pad names to Postscript export
- 01:25 Changeset [5457] by
- - Makefile: fixed odd indentation of "clean" target - Makfile: added …
- 00:36 Changeset [5456] by
- Started module collection with ATR0635 BGA96, 8x12 balls, 0.8 mm pitch.
- 00:06 Changeset [5455] by
- - dump.c didn't complete vector names used in measurements, causing them …
08/15/09:
- 22:52 Changeset [5454] by
- - added -std=gnu99 so that we can use "round" and M_PI - added unit status …
- 21:37 Changeset [5453] by
- - Moved ECNs 0003-0007 from "Discuss" to "Execute".
- 12:58 Changeset [5452] by
- - ecn0014: clean up VBAT and discuss naming of nUSB_OC net
- 12:33 Changeset [5451] by
- - ECN0028: cancelled as too risky
- 12:16 Changeset [5450] by
- - ECN0014: added motivation and replacement part number - ECN0014: added …
- 01:34 Changeset [5449] by
- Oops, title of ECN0028 was wrong in STATUS.
- 01:32 Changeset [5448] by
- - ECN0025 moves to Done. First one to cross the finishing line. - added …
- 01:16 Changeset [5447] by
- - ecn0009 moves from Discuss to Execute. Also got reviewed by Joerg. - …
- 00:12 Changeset [5446] by
- - KiCad? is very liberal when it comes to valid part names, and so are we …
Note: See TracTimeline
for information about the timeline view.
