Timeline


and

09/24/09:

14:02 Changeset [5664] by werner
- mkloe: exit on fped error (forgotten commit)
13:40 Changeset [5663] by werner
- added ECN0040 (for discussion) "Remove backup battery (BAT1701)"
13:10 Changeset [5662] by werner
- added description of why we should and why we can move BT
13:03 Changeset [5661] by werner
- removed "chips to remove" entry, because we have this covered now. - …

09/22/09:

00:55 Changeset [5660] by rehar
added solder paste layer to FH23-39S-0.3SHW
00:51 Changeset [5659] by daveb
label correction
00:40 Changeset [5658] by daveb
ecn001 changes to reflect signal moves as a result of ecn0034.
00:18 Changeset [5657] by daveb
execute ecns 26 (SD card filters), 30 (Telit modem) and 34 (spi to DEBUG …

09/21/09:

21:47 Changeset [5656] by daveb
ecn updates
20:08 Ticket #2312 (/sys/class/backlight/gta02-bl/bl_power is 0 but backlight is on) created by lindi
I do not know exact steps to reproduce yet but I have hit this bug …
05:15 Changeset [5655] by rehar
added LCM connector FH23-39S-0.3SHW

09/20/09:

00:32 Changeset [5654] by rehar
- added SON1408-3 footprint - fixed bug in tsop-6 and sc89-6

09/19/09:

23:33 Changeset [5653] by rehar
added SC89-6 footprint
22:59 Changeset [5652] by rehar
added TSOP-6 footprint
21:40 Changeset [5651] by rehar
added mini USB connector footprint
19:39 Changeset [5650] by rehar
added measurements to SC70-5, VSSOP8 and DFBM-CS320 footprints
19:04 Changeset [5649] by rehar
added TDFN34-16 footprint
17:09 Changeset [5648] by rehar
added SOT23-5 footprint
02:38 Changeset [5647] by rehar
- added VSSOP8 footprint - changed pin1 marker of SC70-5 footprint
01:40 Changeset [5646] by rehar
added SC70-5 footprint

09/18/09:

00:47 Changeset [5645] by rehar
added filter EXC24C footprint

09/17/09:

16:28 Changeset [5644] by rehar
added solder mask layer to LIS302DL and WM8753FL footprint

09/16/09:

14:09 Changeset [5643] by daveb
clariffy that the "VBAT" is for the GSM modem - now "VBAT_GSM"
12:22 Changeset [5642] by daveb
components/ntgd1100l.lib clean up, internal function depiction, proper pin …

09/15/09:

14:19 Ticket #2311 (bq27000 driver should expose CI (capacity inaccurate) flag) created by PaulFertser
bq27k can not always give a good estimate of battery capacity, in this …

09/14/09:

22:41 Changeset [5641] by werner
- docs/GETTING-STARTED: added section on editing and viewing the layout - …
09:32 Changeset [5640] by alvieboy
Apply ECN0035, and fix C8004,C8005 footprint
00:02 Changeset [5639] by daveb
minor modem layout changes.

09/13/09:

22:58 Changeset [5638] by daveb
-PWR_IRQ, +nPWR_IRQ. It's active low. Rask Ingemann Lambertsen …
22:46 Changeset [5637] by daveb
- new IO2V8 power net for Telit GSM modem - new component NTDG1100L - …
13:16 Changeset [5636] by werner
- README: added link to the GUI manual - added a conceptual explanation of …
11:11 Changeset [5635] by werner
- inst.c: cleanup_inst leaked memory when using special pads - changed pad …
09:58 Changeset [5634] by werner
- the set of layers of a pad is now maintained in the instance, so that we …

09/12/09:

23:15 Changeset [5633] by werner
- gui_util.c: make container clean-out globally available as vacate_widget …
16:02 Changeset [5632] by werner
- components/INFO: added a bunch of Telit modem documents
15:48 Changeset [5631] by werner
- Makefile: let make do the and-ing of the steps in "make update" - …
15:40 Changeset [5630] by werner
- added that one should run "make dsv-rebuild" if data sheets are renamed.
15:37 Changeset [5629] by werner
The "dsv" system now supports multiple data sheets per component multiple …
07:34 Changeset [5628] by werner
- added "make update" that combines "svn update" with remaking the …

09/11/09:

18:34 Changeset [5627] by werner
- added solder mask pad type (patch by Rene Harder)

09/10/09:

23:40 Changeset [5626] by werner
- bare pads are now drawn in orange, so that one can see if a pad has a …
23:12 Changeset [5625] by werner
- top-level "make gen" and "make upload" now also visit expanded/ and …
18:36 Ticket #2310 (charging N900 with gta02 causes the gta02 to overheat) created by lindi
Steps to reproduce: 1) modprobe ochi-hcd 2) echo host > …

09/09/09:

19:41 Ticket #2277 (Wireless does not work with the 2.6.29 kernel) closed by PaulFertser
fixed: So ifconfig down doesn't help power saving but the driver is not screwed …
19:31 Ticket #1843 (u-boot's DFU upload garbles data at block boundary) closed by PaulFertser
fixed: Looks like it was fixed since nobody who was using recent u-boot …
19:28 Ticket #1991 ([Suspend] unable to suspend, just stay black screen after wake up by power ...) closed by PaulFertser
fixed
19:27 Ticket #2020 (USB connection messes with suspend/resume state machine) closed by PaulFertser
fixed: Not kernel/bootloader issue. Not reproducible with the latest SHR.
19:26 Ticket #1996 (display stays blank at incoming call) closed by PaulFertser
fixed
19:23 Ticket #1375 (FreeRunner: power_class also working with Neo1973 batteries) closed by PaulFertser
fixed: We do it now. :)
19:22 Ticket #1336 (screen shifted and duplicated after resume in landscape mode) closed by PaulFertser
fixed
19:19 Ticket #2235 (Monochrome display on resume) closed by PaulFertser
fixed
19:17 Ticket #2211 (Windows instant reboot while connecting Freerunner on USB) closed by PaulFertser
fixed
19:16 Ticket #2177 (andy-tracking/de473ca8: unable to powerdown GPS) closed by PaulFertser
fixed
19:12 Ticket #2162 (Changing screen modes (QVGA) corrupted in stable-tracking) closed by PaulFertser
fixed: QVGA works for quite some time already.
19:09 Ticket #2068 ([kernel] Video input device support is not enabled by default) closed by PaulFertser
community: To be discussed with distro maintainers. Closing as "community".
19:06 Ticket #2062 (xglamo doesn't implement any power management) closed by PaulFertser
fixed: Since xglamo is no longer relevant, closing. AFAIK power management is …
19:00 Ticket #2025 (Glamo problem: 4GB SD I/O errors with glamo_mci.sd_max_clk=10000000 and no ...) closed by PaulFertser
fixed: Please try with the maximum sd_drive (sd lines drive strength) setting. …
18:53 Ticket #1985 (no auto-suspend after some time) closed by PaulFertser
invalid: Looks like qpe issue. Please use a supported distro instead.
18:51 Ticket #1948 ([Boot screen]Please Change initial Boot to uBoot-image) closed by PaulFertser
invalid: Unrelated to system software.
18:49 Ticket #1929 (Wlan stops working after some time...) closed by PaulFertser
fixed: Lack of feedback -> closing. Please reopen if you can reproduce with …
18:47 Ticket #1876 (screen does not turn on on incoming call) closed by PaulFertser
fixed: Works in modern distros.
18:46 Ticket #1857 (Powering down GSM module kills resume) closed by PaulFertser
fixed: Not reproducible with modern systems.
18:40 Ticket #1811 (Consider including NILFS2 filesystem support) closed by PaulFertser
wontfix: Please reopen if interested.
18:39 Ticket #1730 (SELinux Kernel Support) closed by PaulFertser
wontfix: Please reopen if still interested.
18:36 Ticket #2293 (linux/andy-tracking: gps does not always honor power_on) closed by PaulFertser
fixed
18:34 Ticket #1702 (Switching of my wifi using power button) closed by PaulFertser
invalid: No feedback from reporter, can not reproduce, closing as invalid.
18:32 Ticket #1687 (FR LCD goes blank suddenly) closed by PaulFertser
fixed
18:30 Ticket #1599 (Suspend / resume breaks audio) closed by PaulFertser
fixed: Modern distros don't use neither PA nor speech-dispatcher.
18:25 Ticket #1742 ([illume] even the WiFi is off, the icon is still there in illume bar) closed by PaulFertser
fixed: Turning off wifi with recommended method (either unbinding s3c-mci or …
18:22 Ticket #1736 ([x11] Device suspends while enlightenment/qpe/X are still starting) closed by PaulFertser
invalid: Not system software issue, not reproducible with maintained distros.
18:16 Ticket #1662 ([GSM] not working properly after x hours of usage) closed by PaulFertser
invalid: Closing as "not system software, and use supported distro"
17:18 Changeset [5624] by rehar
BT module footprint update
05:43 Changeset [5623] by rehar
started BT module footprint
00:17 Changeset [5622] by rehar
lis302dl.fpd - clean-up & comments - changed pin size - changed 1.pin …

09/08/09:

22:28 Changeset [5621] by rehar
added LIS302D LGA14 footprint
19:37 Changeset [5620] by werner
- postscript.c: don't try to print empty pad names, or we'll have a hard …
19:35 Changeset [5619] by daveb
- annotation for gsm antenna - MODEM_ON and MODEM_RST are both inverted …
19:24 Changeset [5618] by daveb
Modem changes - Remove GSM power switch cirtuit (U1705) - Route MODEM_ON …
19:11 Changeset [5617] by rehar
wm8753fl.fpd - added design guidelines to INFO - change dimensions …
05:59 Changeset [5616] by rehar
wm8753fl.fpd - added solder paste layer for thermal land
03:37 Changeset [5615] by rehar
wm8753fl.fpd: - added pad width measurement - fixed exposed land overlap …
02:22 Changeset [5614] by rehar
added WM8753FL footprint

09/07/09:

22:27 Changeset [5613] by werner
CNC tools for prototype development, first batch of them.
08:04 Changeset [5612] by alvieboy
Update ECN status

09/05/09:

21:35 Changeset [5611] by daveb
Rask's SPI 0R ecn - Rask Ingemann Lambertsen <ccc94453@…>
21:28 Changeset [5610] by daveb
Status update
21:26 Changeset [5609] by werner
- modules/stdpass.fpd: changed silk with from 2 mil to 5 mil, like …
21:25 Changeset [5608] by daveb
Modem references in range 81xx, various modem changes.
19:57 Changeset [5607] by rehar
implemented ECN0037
19:31 Changeset [5606] by rehar
implemented ECN0036
19:19 Changeset [5605] by rehar
- canceled ECN0018 "Add beads/filters to audio signals leaving/entering …

09/04/09:

22:47 Changeset [5604] by daveb
modem component references, most things looking pretty good now.

09/02/09:

12:05 Changeset [5603] by werner
- documented that we also need the KiCad? component library. Based on a …
08:12 Changeset [5602] by werner
Replaced Panasonic reference with a more useful one.
07:10 Changeset [5601] by werner
- modules/stdpass.fpd: added over all length measurement - modules/INFO: …
00:55 Changeset [5600] by daveb
modem updates.

09/01/09:

04:58 Changeset [5599] by werner
- GETTING-STARTED: we now have "lazy" PDF for footprints as well
04:57 Changeset [5598] by werner
- use rsync also for top-level Makefile and expanded/Makefile - web/: …
02:12 Changeset [5597] by daveb
more modem updates, yes we do need DTR (AT cmd reference, pg139)
01:54 Changeset [5596] by werner
GE865 documentation overview.

08/31/09:

23:57 Changeset [5595] by daveb
add some notes on remaining tasks
23:37 Changeset [5594] by daveb
further modem corrections.
20:08 Changeset [5593] by werner
- oops, forgot to commit. Thanks, Dave.
16:01 Changeset [5592] by rehar
Added antenna WTE06016 to mkloe script
03:28 Changeset [5591] by rehar
- added commit to ecn0010 and ecn0015 - removed ecn0020 from open ecn list …

08/30/09:

22:31 Changeset [5590] by rehar
- added commit to ecn0032 and ecn0033 - added missing footprint values to …
22:23 Changeset [5589] by rehar
implemented ecn0033
22:18 Changeset [5588] by rehar
implemented ecn0032
20:17 Changeset [5587] by werner
- scripts/all-sheets: added outline information for PDF
19:38 Changeset [5586] by werner
- postscript.c: added outline information for PDF - postscript.c: ignore …
18:39 Changeset [5585] by werner
- modules/mkloe: added -one-ps option to convert all modules to a combined …
13:20 Changeset [5584] by alvieboy
Add antenna and small fixes
13:19 Changeset [5583] by alvieboy
Add ANT8001 (WTE06016)
11:38 Changeset [5582] by alvieboy
New component CON8001 (mm8430-2610)
11:38 Changeset [5581] by alvieboy
New component CON8001 (mm8430-2610)
11:28 Changeset [5580] by alvieboy
WLAN fixes (refs and chip symbol)
06:04 Changeset [5579] by werner
- Makefile: use "make loe" instead of running mkloe directly, so that we …
06:04 Changeset [5578] by werner
- postscript.c: added some code for frame display, but I'm not happy with …
Note: See TracTimeline for information about the timeline view.