Timeline


and

10/16/09:

04:07 Changeset [5693] by werner
- lib/meter.py: added front/rear and scanner channel selection for …

10/14/09:

13:59 Changeset [5692] by werner
- reopened ECN0010 (as "Discuss") and added summary of power supply …
13:31 Changeset [5691] by werner
- moved ECN0019 (Buzz fix) to "Done" - reviewed ECN0038 (speaker EMI …
06:54 Changeset [5690] by werner
- gps.sch and ECN0008: added value for C7601 - ECN0008: added some more …

10/13/09:

04:49 Changeset [5689] by rehar
- implemented removal of R4404 from audio sheet according to ECN0010
04:38 Changeset [5688] by rehar
ECN0010: - added function of removed components as suggested by Werner - …

10/11/09:

19:58 Ticket #2287 (battery removal kobject notifications broken in bq2700 power supply class ...) closed by lars
fixed: Was already fixed some time ago with commit …

10/09/09:

02:47 Changeset [5687] by werner
- moved ECN001 from "Discuss" to "Execute" and implemented it - ECN0011: …

10/08/09:

00:33 Changeset [5686] by werner
- reviewed implementation of ECN0036 and moved ECN to "Done" - reviewed …
00:13 Changeset [5685] by werner
- reviewed implementation of ECN0031 and moved ECN to "Done" - reviewed …

10/07/09:

23:27 Changeset [5684] by werner
- 2+2 = 5, err, 39+18 = 47 :-) Explained why.
19:46 Changeset [5683] by werner
- moved ECN0010 to "Done"
19:41 Changeset [5682] by werner
- replaced 39+18 = 47 with better approximation 56 - added spaces between …
18:32 Changeset [5681] by rehar
removed C4405 from the audio circuit to comply with ecn0032
17:24 Changeset [5680] by rehar
fixed ECN0010 according to Werner's comments
08:04 Changeset [5679] by werner
Corrected inconsistent units: - capitalization (100N -> 100n, etc.) …
07:51 Changeset [5678] by werner
- Werner reviewed ECN0017 (BT to main PCB) and bt.sch - moved ECN0017 to …
00:42 Changeset [5677] by werner
- Minor cleanup on ECN0015 - Moved ECN0015 to "Done".
00:29 Changeset [5676] by werner
- Werner reviewed ECN0010

10/06/09:

23:10 Changeset [5675] by werner
- reviewed ECN0019 (buzz fix)
06:28 Changeset [5674] by werner
- WLAN_SS is CPU -> WLAN, not WLAN -> CPU - added more endpoints to …
01:01 Changeset [5673] by werner
- ECN0011: forgot to commit it. Now it's there, along with an explanation …

10/05/09:

17:18 Changeset [5672] by werner
- CONSOLE_RXD and CONSOLE_TXD connect to pins 2 and 3 of the debug …
16:32 Changeset [5671] by werner
- ECN0002: added software impact and promoted to "Discuss"

10/04/09:

18:26 Changeset [5670] by werner
Grr, replaced one typo with another.
18:23 Changeset [5669] by werner
- ECN0002: added author - io.sch: remove nNOR_WP from debug connector

10/03/09:

20:18 Changeset [5668] by rehar
added more footprint names to components
18:49 Changeset [5667] by rehar
added footprint names to components
17:05 Changeset [5666] by rehar
added FA2012 footprint

10/01/09:

11:46 Changeset [5665] by rask
- added ECN0041 (for discussion) "Test points and 0R resistors for camera …
08:42 Ticket #2313 (Device neo1973-pm-gsm.0 failed to suspend: error -16) created by lindi
Sometimes when I turn GSM off, suspend the device and put the phone to my …

09/24/09:

14:02 Changeset [5664] by werner
- mkloe: exit on fped error (forgotten commit)
13:40 Changeset [5663] by werner
- added ECN0040 (for discussion) "Remove backup battery (BAT1701)"
13:10 Changeset [5662] by werner
- added description of why we should and why we can move BT
13:03 Changeset [5661] by werner
- removed "chips to remove" entry, because we have this covered now. - …

09/22/09:

00:55 Changeset [5660] by rehar
added solder paste layer to FH23-39S-0.3SHW
00:51 Changeset [5659] by daveb
label correction
00:40 Changeset [5658] by daveb
ecn001 changes to reflect signal moves as a result of ecn0034.
00:18 Changeset [5657] by daveb
execute ecns 26 (SD card filters), 30 (Telit modem) and 34 (spi to DEBUG …

09/21/09:

21:47 Changeset [5656] by daveb
ecn updates
20:08 Ticket #2312 (/sys/class/backlight/gta02-bl/bl_power is 0 but backlight is on) created by lindi
I do not know exact steps to reproduce yet but I have hit this bug …
05:15 Changeset [5655] by rehar
added LCM connector FH23-39S-0.3SHW

09/20/09:

00:32 Changeset [5654] by rehar
- added SON1408-3 footprint - fixed bug in tsop-6 and sc89-6

09/19/09:

23:33 Changeset [5653] by rehar
added SC89-6 footprint
22:59 Changeset [5652] by rehar
added TSOP-6 footprint
21:40 Changeset [5651] by rehar
added mini USB connector footprint
19:39 Changeset [5650] by rehar
added measurements to SC70-5, VSSOP8 and DFBM-CS320 footprints
19:04 Changeset [5649] by rehar
added TDFN34-16 footprint
17:09 Changeset [5648] by rehar
added SOT23-5 footprint
02:38 Changeset [5647] by rehar
- added VSSOP8 footprint - changed pin1 marker of SC70-5 footprint
01:40 Changeset [5646] by rehar
added SC70-5 footprint

09/18/09:

00:47 Changeset [5645] by rehar
added filter EXC24C footprint

09/17/09:

16:28 Changeset [5644] by rehar
added solder mask layer to LIS302DL and WM8753FL footprint

09/16/09:

14:09 Changeset [5643] by daveb
clariffy that the "VBAT" is for the GSM modem - now "VBAT_GSM"
12:22 Changeset [5642] by daveb
components/ntgd1100l.lib clean up, internal function depiction, proper pin …
Note: See TracTimeline for information about the timeline view.