Timeline


and

04/19/10:

22:57 Changeset [5921] by werner
%dump didn't dump the root frame because this frame was only appended to …
21:14 Changeset [5920] by werner
URL of Samsung's 2442 page changed. (Fixed by Igor Almeida.)
14:39 Changeset [5919] by werner
Added debugging directives to the fped language. They're describe at the …
12:23 Changeset [5918] by werner
When unselecting a value selected for editing in a table with a single …

04/18/10:

22:01 Changeset [5917] by alphaone
Correctly fix problem introduced by revision 5910 !dif->flags & …
19:06 Changeset [5916] by stefan
src/main.c: Fix last commit for good. Thanks to Werner Almesberger for …
16:43 Changeset [5915] by werner
When editing, fped would sometimes not respond to [Enter] if the value had …

04/13/10:

12:48 Changeset [5914] by werner
BOOM needs Perl 5.10.0 or above, which actually is quite bleeding edge.

04/12/10:

14:46 Changeset [5913] by werner
BOM updated and corrections. - bom/research/STATUS: SN74AUP1G00DCKR …

04/07/10:

20:02 Changeset [5912] by werner
- docs/ecn/ecn0045.txt: corrected the status of U4902 and changed the …
19:24 Changeset [5911] by werner
Added ECN0045 discussing the fate of components with zero stock at FIC.
18:04 Changeset [5910] by stefan
main.c: Add parentheses to fix warning. The cleaner compile output let me …
18:04 Changeset [5909] by stefan
configure.ac: Add SILENT_RULES If automake >= 1.11 is used we now use a …
17:11 Changeset [5908] by werner
Updated location of the WM3236A (WLAN) data sheet.
16:41 Changeset [5907] by werner
- moved more project-specific equivalences from bom/dk/digi-key.equ to …
14:09 Changeset [5906] by werner
Added prerequisites for common but not entirely ubiquitous tools.
13:47 Changeset [5905] by werner
Found a perfect replacement for the Richtek RT9013-12PB (U1702) - …

04/06/10:

19:44 Changeset [5904] by werner
Added more measurement. Dave found some more jacks at Farnell.
18:11 Changeset [5903] by werner
- added small 3.5 mm stereo (no microphone) jack, for comparison
16:53 Changeset [5902] by werner
- bom/research/jk4401: researched the alternatives some more. None are …
14:45 Changeset [5901] by werner
- bom/Makefile: BOOM can now also live in gta02-core/boom/ - …

04/05/10:

20:25 Changeset [5900] by werner
Documented the history of how the PCF50633 moved from NXP to ST-Ericsson.
18:55 Changeset [5899] by werner
Changed equivalence of Proconn SMSN16-J0-2214 with Amphenol 101-00492-20 …
16:59 Changeset [5898] by werner
Replaced the HT-110USD red LED with the Dialight 598-8320-107F

04/04/10:

20:30 Changeset [5897] by werner
Assorted minor cleanup. - components/INFO: updated location of CPU data …
07:15 Changeset [5896] by werner
Researched the Richtek RT9711BPB
06:29 Changeset [5895] by werner
Researched the Richtek RT9013-12PB
05:44 Changeset [5894] by werner
Researched the Ricoh R3113D241A-TR-F
05:20 Changeset [5893] by werner
Researched the Analogic Tech AAT1275IRN-5.0-T1
03:53 Changeset [5892] by werner
- bom/research/STATUS: removed Ralec RTA02-4D330JTP. It's already been …
01:24 Changeset [5891] by laforge
use 'svnversion -n' to prevent newline at end of version info

04/03/10:

19:45 Changeset [5890] by werner
One more part and a bit more research. Score: SVN Rev -- No source -- -- …
11:43 Changeset [5889] by werner
- added 1210 footprint
11:38 Changeset [5888] by werner
- pmu.sch: changed footprint of L1704 to 1210, to allow eithr part …
11:21 Changeset [5887] by werner
- Makefile: when generating schematics annotated with component …
04:37 Changeset [5886] by werner
- boom/parser.pl: added file-type-like construct #END to skip remaining …

04/02/10:

09:01 Changeset [5885] by werner
Substituted resistor array (Ralec). Score: SVN Rev -- No source -- -- …
08:36 Changeset [5884] by werner
More research and more parts. Score: SVN Rev -- No source -- -- Digi-Key …
06:51 Changeset [5883] by werner
Found 1SS400 and DTC123JETL. SVN Rev -- No source -- -- Digi-Key -- -- …
06:35 Changeset [5882] by werner
Status and details of component research.

04/01/10:

23:05 Changeset [5881] by werner
Substituted varistors (Karmax). Latest score: SVN Rev -- No source -- -- …
22:59 Changeset [5880] by werner
- boom/bom2part: when matching characteristics, ignore fields whose value …
21:34 Changeset [5879] by werner
- pmu.sch: tentatively lowered current rating of L1704 to 600 mA to make …
21:14 Changeset [5878] by werner
ECN0044: Current rating of backlight LED inductor (L1704) (Discussion of …
20:51 Changeset [5877] by werner
Some LED cleanup. Added more inductors. SVN Rev -- No source -- -- …
20:03 Changeset [5876] by werner
Making another small step towards using parameter-based part selection …
18:31 Ticket #2335 (GSM buzz on FreeRunner A7 (seven)) created by blindcoder
There is a lot of GSM buzz on the FR A7 (recording attached). I was trying …
17:09 Changeset [5875] by werner
Parameters can now be specified as minimum/maximum values, not just as …
17:07 Changeset [5874] by werner
Now working on the inductors: SVN Rev -- No source -- -- Digi-Key -- -- …
15:32 Changeset [5873] by werner
Substituted capacitors by Walsin. This should have been the last caps …
15:18 Changeset [5872] by werner
Oops, the AVX TLJA107M006R0500 had a metric footprint and thus didn't …
15:05 Changeset [5871] by werner
Substituted more capacitors, including everything by AVX. SVN Rev -- No …
14:22 Changeset [5870] by werner
Substituted more capacitors, including all X5R/X7R/Y5V by Darfon.
12:34 Changeset [5869] by werner
- bom/farnell/: added NTGD1100LT1G MOSFET transistor - bom/misc.chr, …

03/31/10:

21:53 Changeset [5868] by werner
- usb.sch: R4918 had no footprint
21:52 Changeset [5867] by werner
Added MS2V-T1S (Farnell) and the remaining 0402 resistors (Digi-Key).
20:59 Changeset [5866] by werner
When adding new components to the Digi-Key equivalences list, the entire …
20:25 Changeset [5865] by werner
- bom/arrow/: added Arrow NAC catalog - bom/Makefile: use Arrow NAC …
19:51 Changeset [5864] by werner
Found Micro Crystal CC7V-T1A via Octopart. - bom/farnell/: files for …
19:26 Changeset [5863] by werner
- bom/dk/digi-key.equ: replaced all resistors from Ralec that appeared in …
18:39 Changeset [5862] by werner
We'll use a lot of resistors from Stackpole, so we generate their …
18:18 Changeset [5861] by werner
When parting the KiCad? BOM or .inv or .equ files, convert special …
18:17 Changeset [5860] by werner
- bom/gta02-core.sub: changed translation rule for HB414-IV01E from …

03/27/10:

13:45 Changeset [5859] by werner
- bom/dk/digi-key.equ: added TI SN74AHC1G125DCKR (buffer, inverted enable) …
13:15 Changeset [5858] by werner
- bom/dummy.inv: removed the acceleration sensor - bom/dk/digi-key.equ: …
04:00 Changeset [5857] by werner
Added the WM8753 from the Mouser catalog. There's no automatic catalog …

03/26/10:

07:40 Changeset [5856] by werner
Automated updating of Digi-Key's inventory and price list. - …
06:28 Changeset [5855] by werner
Move digi-key.* to separate directory bom/dk/ to make bom/ less crowded
06:17 Changeset [5854] by werner
- bom/Makefile, bom/fic/Makefile: added target "null" to generate empty …
Note: See TracTimeline for information about the timeline view.